Phoenix Contact ELR H51-IES-24DC500AC-9-IOL Hybrid Motor Starter

Selling Points

1Short-circuit-proof design ensures reliable operation in harsh environments.
2Emergency stop function provides immediate shutdown for safety.
3Adjustable overload shutdown allows for customizable protection settings.
424 V DC input with 9 A output current for efficient control.
5SIL 3/PL e safety rating meets high standards for safety and reliability.

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

Parameter	Value	Parameter	Value
Product type	Hybrid motor starters	Product family	CONTACTRON
Operating mode	100% operating factor	Article revision	02
Number of phases	3	Motor starter type	Reversing starter
Switching frequency	≤ 2 Hz (Load-dependent)	Switching frequency	≤ 2 Hz (Load-dependent)
Maximum power dissipation	7 W	Minimum power dissipation	0.88 W
Coordination type	1	Rated control circuit supply voltage U	24 V DC
Control supply voltage range	19.2 V DC ... 30 V DC	Rated control supply current I	65 mA
Protective circuit	Surge protection Reverse polarity protection; Parallel polarity protection diode	Nominal voltage for I/O supply	24 V DC (This supply voltage is provided via the IO-Link interface of the IO-Link master.)
Current consumption	typ. 65 mA ±15 % (24 V DC) max. 150 mA	Protective circuit	Reverse polarity protection Short-circuit protection Overload protection
Rated insulation voltage	550 V	Rated surge voltage	6 kV
Overvoltage category	III	Degree of pollution	2
Insulation characteristics between the control input and control supply voltage, and auxiliary circuit to the main circuit	Safe isolation (IEC 60947-1)	Isolation characteristics between the control input and control supply voltage to auxiliary circuit	Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC Safe isolation (EN 50178) in the auxiliary circuit ≤ 300 V AC
Operate threshold	> 60 A	Response time	< 0.5 s
Input name	Enable input	Rated actuating voltage U	24 V DC
Triggering voltage range	19.2 V DC ... 30 V DC	Rated actuating current I	7 mA
Switching threshold	9.6 V (“0” signal) 19.2 V (“1” signal)	Switching level	< 5 V DC (For EMERGENCY STOP)
Typical turn-off time	< 30 ms	Number of ports	1
Connection method	COMBICON	Connection technology	3-conductor
Specification	V1.1.1	Reverse polarity protection	yes
Cycle Time	30 ms	Amount of process data	8 Byte (Input data) 2 Byte (Output data)
Rated operating voltage U	500 V AC	Operating voltage range	42 V AC ... 550 V AC
Rated operating current I	9 A (AC-51) 7 A (AC-53a)	Mains frequency	50/60 Hz
Load current range	1.5 A ... 9 A (see to derating)	Trigger characteristic in acc. with IEC 60947-4-2	Class 10A
Cooling time	20 min (for auto reset)	Leakage current	0 mA
Protective circuit	Surge protection; Varistor	Connection method	Push-in connection
Stripping length	10 mm	Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²	Conductor cross section AWG	24 ... 14
Connection method	Screw connection	Stripping length	8 mm
Screw thread	M3	Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²	Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm ... 0.6 Nm 5 lb	Status display	LED (yellow)
Operating voltage display	Green LED	Error indication	Red LED
Width	22.5 mm	Height	160 mm
Depth	114.5 mm	Flammability rating according to UL 94	V0 (Housing)
Degree of protection	IP20	Ambient temperature (operation)	-5 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 80 °C	Altitude	≤ 2000 m
Certificate	UKCA-compliant	Standards/regulations	IEC 60947-1 EN 60947-4-2 IEC 61508 ISO 13849-1
Assembly note	alignable, for spacing see derating	Mounting position	vertical (horizontal DIN rail, motor output below)

Specifications may be subject to change without notice