Product Model
FLK 14/16/EZ-DR/HF/ 800/S7
Selling Points
- 1Ensures safety and environmental compliance.
- 20.14 mm² cross-section with 7 litz wires for optimal signal transmission.
- 3Operates from -10 °C to 70 °C, suitable for various installation conditions.
- 4Withstood up to 5000 bending cycles at a radius of ≥ 15x outside diameter.
- 5UL Listed, cUL Listed, and EAC approved for global use.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Product type | System cable | Article revision | 02 |
Insulation | Functional insulation | Overvoltage category | II |
Pollution degree | 2 | Degree of protection | IP00 |
Degree of protection (Installation location) | ≥ IP54 (Installation location) | Ambient temperature (operation) | -40 °C ... 70 °C (fixed installation)
-10 °C ... 70 °C (flexible installation) |
Ambient temperature (storage/transport) | -40 °C ... 80 °C | Altitude | ≤ 2000 m |
Operating voltage (AC) | ≤ 25 V AC | Operating voltage (DC) | ≤ 60 V DC |
Nominal operating mode | 100% operating factor | Current (Per path, 50°C) | ≤ 1 A |
Current (Per path) | ≤ 0.6 A | Rated insulation voltage | 63 V |
Rated surge voltage | 0.6 kV | Cable length | 8 m |
Number of positions | 14 | Shielded | no |
Conductor type | Assembled, halogen-free round cable | Conductor structure signal line | 7x 0.16 mm |
AWG signal line | 26 | Conductor cross section | 14x 0.14 mm² |
Wire diameter incl. insulation | 1 mm ±0.03 mm | External cable diameter | 5.80 mm ±0.4 mm |
Outer sheath, material | halogen-free (type 2) | External sheath, color | gray |
Conductor material | Tin-plated Cu litz wires | Cable resistance | ≤ 145 Ω/km (20 °C) |
Insulation resistance | ≥ 20 MΩ*km (20 °C) | Smallest bending radius, fixed installation | 50 mm |
Smallest bending radius, movable installation | 93 mm | Dynamic load capacity (bending) | Max. bending cycles: 5000 (at a radius of ≥ 15x outside diameter) |
Halogen-free | yes | Flame resistance | IEC 60332-1-2 (raw cable)
VDE 0842, Part 332-1-2 (raw cable)
IEC 60332-3-22 (raw cable) |
Resistance to oil | can withstand occasional splashes (raw cable) | white | IDC/FLK16 (1) = IDC/FLK14 (10) |
violet | IDC/FLK16 (2) = IDC/FLK14 (8) | white-brown | IDC/FLK16 (3) = IDC/FLK14 (12) |
blue | IDC/FLK16 (4) = IDC/FLK14 (7) | white-orange | IDC/FLK16 (5) = IDC/FLK14 (14) |
green | IDC/FLK16 (6) = IDC/FLK14 (6) | yellow | IDC/FLK16 (8) = IDC/FLK14 (5) |
gray | IDC/FLK16 (9) = IDC/FLK14 (9) | orange | IDC/FLK16 (10) = IDC/FLK14 (4) |
white-black | IDC/FLK16 (11) = IDC/FLK14 (11) | red | IDC/FLK16 (12) = IDC/FLK14 (3) |
white-red | IDC/FLK16 (13) = IDC/FLK14 (13) | brown | IDC/FLK16 (14) = IDC/FLK14 (2) |
black | IDC/FLK16 (16) = IDC/FLK14 (1) | Connection in acc. with standard | IEC 60603-13 |
Connection method | IDC/FLK socket strip | Number of connections | 1 |
Number of positions | 14 | Insertion/withdrawal cycles | > 50 |
Pitch | 2.54 mm | Connection in acc. with standard | IEC 60603-13 |
Connection method | IDC/FLK socket strip | Number of connections | 1 |
Number of positions | 16 | Insertion/withdrawal cycles | > 50 |
Pitch | 2.54 mm | Standards/regulations | DIN EN 50178 |
Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
Specifications may be subject to change without notice