Product Model
FLKM 50-PA-S135/P
Selling Points
- 1Connects up to 32 channels for Siemens SIMATIC S5-135U systems.
- 2Max current of 2 A ensures reliable power supply.
- 3Compatible with 25 V AC and 60 V DC for versatile applications.
- 4Flat-ribbon cable connector adheres to IEC 60603-13 standards.
- 52-Year warranty for added product assurance.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Product type | Front adapter | Insulation | Functional insulation |
Overvoltage category | II | Pollution degree | 2 |
Operating voltage (AC) | ≤ 25 V AC | Operating voltage (DC) | ≤ 60 V DC |
Nominal operating mode | 100% operating factor | Current (Per path) | ≤ 0.5 A |
Current (per connection) | ≤ 8 A (Feed-in via separate power supply) | Current (Total current per byte) | ≤ 2 A (Feed-in via connector) |
Rated insulation voltage | 63 V | Rated surge voltage | 0.6 kV |
Connection method | IDC/FLK pin strip | Number of connections | 1 |
Number of positions | 50 | Pitch | 2.54 mm |
Degree of protection | IP00 | Degree of protection (Installation location) | ≥ IP54 (Installation location) |
Ambient temperature (operation) | -20 °C ... 50 °C | Ambient temperature (storage/transport) | -20 °C ... 70 °C |
Altitude | ≤ 2000 m | Standards/regulations | DIN EN 50178 |
Assembly note | in rows with zero spacing | Mounting position | any |
Notes on operation | No additional touch protection is required when using a SELV/PELV voltage (≤ 25 V AC or 60 V DC). | Notes on operation | At least one functional insulation against adjacent modules is complied with (in the support rail direction). If the application has stricter requirements for the insulation (basic insulation or reinforced insulation), they must be realized by applying suitable measures (e. g. partition plates). |
Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
Specifications may be subject to change without notice