Product Model
FL MGUARD RS VPN ANALOG
Selling Points
- 1Advanced Firewall Protection: Stateful Inspection Firewall for optimum safety and simple configuration.
- 2High-Speed VPN: Supports IPsec VPN with hardware encryption up to 70 Mbps.
- 3Integrated Analog Modem: Enables secure data transmission over analog networks.
- 4Web-Based Management: Easy configuration and management via web interface or SNMP.
- 5Robust Connectivity: 10/100 Mbps Ethernet in RJ45 twisted pair, up to 100 m transmission length.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Width | 45 mm | Height | 99 mm |
Depth | 112 mm | Color | green |
Housing material | PA 6.6 | Connection method | RJ45 |
Transmission speed | 10/100 Mbps | Transmission physics | Ethernet in RJ45 twisted pair |
Transmission length | 100 m (per segment) | Signal LEDs | Supply voltage, data transmission, error, link, activity |
No. of channels | 2 | Connection method | Plug-in/screw connection via COMBICON |
Connection method | Connectable and optional LED | Basic functions | Router with intelligent Firewall, VPN and integrated analog modem |
Supported browsers | HTTPS support required | Product type | Security router for the DIN rail |
Type | Stand-Alone | Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
1:1 Network Address Translation (NAT) in the VPN | supported | Number of VPN tunnels | 10 (up to 250 with license possible) |
Authentication | X.509v3 certificates with RSA or PSK | Data integrity | MD5, SHA-1 |
Dynamic Host Configuration Protocol (DHCP) support | Server or Relay Agent | Filtering | MAC and IP addresses, ports, protocols |
Firewall data throughput | max. 210 Mbps (Router mode, default firewall rules, bidirectional throughput)
max. 149 Mbps (Stealth mode, default firewall rules, bidirectional throughput) | Firewall rules | Configurable stateful inspection firewall |
Basic functions | Router with intelligent Firewall, VPN and integrated analog modem | Internet Protocol Security (IPsec) mode | ESP tunnel / ESP transport |
Link Layer Discovery Protocol (LLDP) | As per protocol 802.2 | Network Time Protocol (NTP) client | Client |
Remote Syslog Logging | on externals server | Routing | Standard routing, NAT, 1:1-NAT, port forwarding |
Protection against | IP spoofing, DoS and Syn Flood Protection | Encryption methods | DES, 3DES, AES-128, -192, -256 |
Virtual private network (VPN) throughput | max. 85 Mbps (Router mode, VPN bidirectional throughput)
max. 58 Mbps (Stealth mode, VPN bidirectional throughput) | Local diagnostics | P1, P2 Supply voltage US1, US2 Green LED
One LED per port Link active Green LED |
Maximum power dissipation for nominal condition | 4.08 W | Supply voltage | 24 V DC |
Supply voltage range | 9 V DC ... 36 V DC | Power supply connection | Via COMBICON, max. conductor cross section 2.5 mm² |
Residual ripple | 3.6 V | Typical current consumption | 170 mA |
Signal contact control voltage | 24 V DC (typical) | Signal contact control current | 170 mA (typical) |
Connection method | RJ45, shielded | Degree of protection | IP20 |
Ambient temperature (operation) | 0 °C ... 55 °C | Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
Mounting type | DIN rail mounting | Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Conformance with EMC directives | IEC 61000-6-2 IEC 61000-4-2 (ESD) 6 kV contact discharge, 8 kV air discharge
IEC 61000-6-2 IEC 61000-4-3 (immunity to radiated interference) 10 V/m (80 MHz ... 2000 MHz)
IEC 61000-6-2 IEC 61000-4-4 (burst) 2 kV power line, 1kV data line
IEC 61000-6-2 IEC 61000-4-5 (surge) power line: 2 kV (line/earth), 1 kV (line/line), 1 kV data line
IEC 61000-6-2 IEC 61000-4-6 (immunity to conducted interference) 3 V (10 kHz ... 150 kHz), 10 V (150 kHz ... 80 MHz) | Noise immunity | EN 61000-6-2:2005 |
Noise emission | EN 61000-6-4 | Status display | LEDs:P1, P2, Fault, State, Error, LAN, WAN |
Specifications may be subject to change without notice