Product Model
FL MGUARD RS VPN TRUMPF
Selling Points
- 1Equipped with an intelligent firewall and VPN for maximum security.
- 2Supports data throughput up to 210 Mbps in router mode and 149 Mbps in stealth mode.
- 3Supports up to 10 VPN tunnels (up to 250 with additional license) and hardware encryption.
- 4Metal housing with extended temperature range (-20°C to 60°C) and humidity resistance (5% to 95% non-condensing).
- 5Simple configuration via web browser with HTTPS support and customizable firewall rules.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Width | 45 mm | Height | 99 mm |
Depth | 112 mm | Note on application | Only for industrial use |
Color | green | Housing material | PA 6.6 |
Connection method | RJ45 | Transmission speed | 10/100 Mbps |
Transmission physics | Ethernet in RJ45 twisted pair | Transmission length | 100 m (per segment) |
Signal LEDs | Supply voltage, data transmission, error, link, activity | No. of channels | 2 |
Connection method | Plug-in/screw connection via COMBICON | Connection method | Connectable and optional LED |
Basic functions | Router with intelligent Firewall and VPN | Supported browsers | HTTPS support required |
Product type | Security routers without DIN rail mounting | Type | Stand-Alone |
Protection class | III (IEC 61140, EN 61140, VDE 0140-1) | Local diagnostics | P1, P2 Supply voltage US1, US2 Green LED
One LED per port Link active Green LED |
Maximum power dissipation for nominal condition | 4.08 W | Supply voltage | 24 V DC |
Supply voltage range | 9 V DC ... 36 V DC | Power supply connection | Via COMBICON, max. conductor cross section 2.5 mm² |
Residual ripple | 3.6 V | Typical current consumption | 170 mA |
Signal contact control voltage | 24 V DC (typical) | Signal contact control current | 170 mA (typical) |
Connection method | RJ45, shielded | Degree of protection | IP20 |
Ambient temperature (operation) | 0 °C ... 55 °C | Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
Mounting type | DIN rail mounting | Electromagnetic compatibility | Conformance with EMC Directive 2004/108/EC |
Conformance with EMC directives | IEC 61000-6-2 IEC 61000-4-2 (ESD) 6 kV contact discharge, 8 kV air discharge
IEC 61000-6-2 IEC 61000-4-3 (immunity to radiated interference) 10 V/m (80 MHz ... 2000 MHz)
IEC 61000-6-2 IEC 61000-4-4 (burst) 2 kV power line, 1kV data line
IEC 61000-6-2 IEC 61000-4-5 (surge) power line: 2 kV (line/earth), 1 kV (line/line), 1 kV data line
IEC 61000-6-2 IEC 61000-4-6 (immunity to conducted interference) 3 V (10 kHz ... 150 kHz), 10 V (150 kHz ... 80 MHz) | Noise immunity | EN 61000-6-2:2005 |
Noise emission | EN 61000-6-4 | Status display | LEDs:P1, P2, Fault, State, Error, LAN, WAN |
Specifications may be subject to change without notice