Product Model
FL SFP LH
Selling Points
- 1Supports data transmission speeds of up to 1000 Mbps.
- 2Designed for long-haul applications with a maximum transmission length of 80 km.
- 3Utilizes single-mode fiberglass with a wavelength of 1550 nm.
- 4Operates in ambient temperatures from -40°C to 85°C and withstands humidity levels from 30% to 95%.
- 5Meets WEEE/RoHS compliance and is certified by CUL and UL.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Width | 13.7 mm | Height | 8.95 mm |
Length | 56.5 mm | Note on application | Only for industrial use |
Housing material | Metal | Mounting type | Insert in SFP slot |
Connection method | LC | Transmission speed | 1 Gbps |
Transmit capacity, minimum | 0 dBm | Transmit capacity, maximum | 5 dBm |
Minimum receiver sensitivity | -24 dBm | Maximum receiver sensitivity | -3 dBm |
Transmission physics | Single-mode fiberglass | Transmission length | 80 km (Fiberglass 9/125) |
Wavelength | 1550 nm | Signal LEDs | depending on the Factoryline device |
No. of channels | 1 (LC single mode) | Transmit capacity, minimum | 0 dBm |
Transmit capacity, maximum | 5 dBm | Minimum receiver sensitivity | -3 dBm |
Maximum receiver sensitivity | -24 dBm | Product type | SFP module |
Type | Factoryline devices with SFP slot | Format | SFP (Small Form-factor Pluggable) |
Article revision | 02 | Status display | via a Factoryline device |
Current consumption | 300 mA | Maximum power dissipation for nominal condition | 1 W |
Transmission medium | FO | Supply voltage | 3.3 V (via Factoryline switch) |
Power supply connection | via SFP slot | Max. current consumption | 300 mA |
Current consumption | 300 mA | Connection method | To insert in SFP slot |
Degree of protection | IP20 | Ambient temperature (operation) | -40 °C ... 85 °C (non-condensing) |
Ambient temperature (storage/transport) | -40 °C ... 85 °C (non-condensing) | Case temperature | max. 85 °C (Operation) |
Permissible humidity (operation) | 30 % ... 95 % (non-condensing) | Permissible humidity (storage/transport) | 30 % ... 95 % (non-condensing) |
Vibration (operation) | in acc. with IEC 60068-2-6: 5g, 150 Hz | Air pressure (operation) | 86 kPa ... 108 kPa (1500 m above sea level) |
Air pressure (storage/transport) | 66 kPa ... 108 kPa (3500 m above sea level) | Standard designation | Laser equipment safety |
Standards/specifications | IEC 60825 |
Specifications may be subject to change without notice