Product Model

FL SWITCH 1005NTC

In Stock
Last updated: 2025/4/19
Phoenix Contact FL SWITCH 1005NTC

Selling Points

  • 1High-Performance Networking: Designed for seamless integration into complex electrical networks.
  • 2Advanced Narrow Design: Optimizes space utilization in industrial control panels.
  • 3Five RJ45 Ports: Supports 10/100 Mbps on all ports for efficient data transmission.
  • 4Automatic Data Transmission Speed Detection: Simplifies installation and setup with autocrossing function.
  • 5Quality of Service (QoS) Prioritization: Ensures reliable communication and efficient data exchange.
Product Details
FL SWITCH 1005NTC
Phoenix Contact

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

ParameterValueParameterValue
Width
22.5 mm
Height
117 mm
Depth
84 mm
EMC note
EMC: class A product, see manufacturer's declaration in the download area
Housing material
Polycarbonate fiber reinforced Aluminum / steel sheet DC01
Mounting type
DIN rail mounting
Number of interfaces
5
Connection method
RJ45
Note on the connection method
Auto negotiation and autocrossing
Transmission speed
10/100 Mbps
Transmission physics
Ethernet in RJ45 twisted pair
Transmission length
100 m (per segment)
Signal LEDs
Data receive, link status
No. of channels
5 (RJ45 ports)
Product type
Switch
Product family
Unmanaged Switch 1000
MTTF
173.1 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%) 1627.3 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) 1538.9 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
Article revision
00
Basic functions
Unmanaged switch Autonegotiation Store and Forward switching mode
PROFINET conformance class
Conformance-Class A
MAC address table
2k
Status and diagnostic indicators
LEDs: U
Additional functions
100 BASE-TX/100BASE-FX (IEEE 802.3u) Quality of Service (QoS) prioritization (IEEE 802.1p) Energy-efficient Ethernet (IEEE 802.3az) 10Base-T (IEEE 802.3)
Basic functions
Unmanaged switch Autonegotiation Store and Forward switching mode
Maximum power dissipation for nominal condition
1.377 W (at 24 V DC)
Transmission medium
Copper
Supply voltage (DC)
24 V
Supply voltage (AC)
24 V AC (50/60 Hz)
Supply voltage range
9 V DC ... 32 V DC 18 V AC ... 30 V AC (50/60 Hz)
Power supply connection
Via COMBICON, max. conductor cross section 2.5 mm²
Residual ripple
3.6 V
Max. current consumption
153 mA (at 9 V DC)
Typical current consumption
55 mA (at 24 V DC)
Connection method
Push-in spring connection
Conductor cross section, rigid
0.2 mm² ... 2.5 mm²
Conductor cross section, flexible
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
24 ... 12
Stripping length
10 mm
Degree of protection
IP30
Ambient temperature (operation)
-40 °C ... 75 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Altitude
2000 m (maximum)
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Shock (operation)
30g (EN 60068-2-27)
Vibration (operation)
in acc. with IEC 60068-2-6: 5g, 150 Hz
Air pressure (operation)
79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
Air pressure (storage/transport)
79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
FCC
Title 47 Part 15 Subpart B:2018 Class A
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Conformance with EMC directives
EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A EN 61000-6-2 EN 61000-4-5 (surge) Criterion B EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A EN 61000-6-2 EN 61000-4-8 (electromagnetic fields) Criterion A EN 61000-6-2 Class A
Noise immunity
EN 61000-6-2:2005
Noise emission
EN 61000-6-4:2007 + A1:2011
Basic functions
Unmanaged switch Autonegotiation Store and Forward switching mode
Status display
LEDs: U

Specifications may be subject to change without notice