Product Model
FL SWITCH EP7428R-L3F1
Selling Points
- 1Supports 10/100/1000 Mbps copper and 1000/10,000 Mbps SFP ports.
- 2Rear modules are hot-swappable for easy maintenance and upgrades.
- 3Conformal coating for harsh environments and IP20 rating for protection.
- 4Extensive security functions for remote, local, and network access areas.
- 5Layer 2 and Layer 3 functions with uplink connections from 1 Gbps to 10 Gbps.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Width | 486.2 mm | Height | 44.4 mm |
Depth | 446.7 mm | Note on application | Only for industrial use |
Mounting type | Rack mounting | Mounting type | Rack mount, includes brackets |
Connection method | RJ45 | Note on the connection method | Auto negotiation and autocrossing |
Transmission speed | 10/100/1000 Mbps | Transmission physics | Copper |
Transmission length | 100 m (per segment) | No. of channels | RJ45 or SFP |
Connection method | SFP | Transmission speed | 1000/10,000 Mbps (full duplex) |
Transmission physics | Depending on the SFP module | Output name | Alarm relay output: 24 V DC, 1 A maximum |
Product type | Switch | Product family | Managed Switch EP7000 |
Article revision | 05 | Overvoltage category | II |
Degree of pollution | 2 | Signal contact control voltage | 24 V DC |
Signal contact control current | 1 A | MAC address table | 16k |
Maximum power dissipation for nominal condition | 60 W | Supply voltage | Based on modular power supplies used |
Signal contact control voltage | 24 V DC | Signal contact control current | 1 A |
Connection name | Power supply | Connection method | Screw connection |
Conductor cross section, rigid | 0.2 mm² ... 2.5 mm² | Conductor cross section, flexible | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG | 24 ... 12 | Degree of protection | IP20 |
Ambient temperature (operation) | -40 °C ... 85 °C (Type tested to 85 °C for 16 hours) | Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Permissible humidity (operation) | 5 % ... 95 % (non-condensing) | Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
Vibration (operation) | in acc. with IEC 60068-2-6: 5g, 150 Hz | Standard designation | Ambient conditions |
Standards/specifications | IEC 61850-3
IEEE 1613 | Conformance | CE-compliant |
Noise immunity | IEC 61850-3, IEEE 1613, EN 61000-6-2: 2005 |
Specifications may be subject to change without notice