Product Model
FL WLAN 1100
Selling Points
- 1Robust Design: Built with a shock-proof housing (IK08) for reliable operation in harsh environments.
- 2Dual-Band Support: Operates in both 2.4 GHz and 5 GHz bands, ensuring stable wireless communication.
- 3MIMO Antennas: Equipped with two internal antennas for enhanced signal strength and coverage.
- 4Easy Installation: Single-hole mounting for quick and straightforward setup.
- 5Multi-Functional: Supports access point, client, and repeater modes for versatile network configurations.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Note on application | Only for industrial use | Product type | Wireless module |
Type | Stand-Alone | Article revision | 12 |
Overvoltage category | none | Pollution degree | 2 |
Number | 1 | Type | IEEE 802.11 a/b/g/n 2.4 GHz and 5 GHz to 300 Mbps |
Assembly note | Permanently installed | Maximum power dissipation for nominal condition | 4.5 W |
Connection technology | COMBICON | Connection method | Push-in spring connection |
Note on the connection method | Recommended conductor cross section: 0.75 mm²
Recommended ferrule: connection length 10 mm
Recommended crimping pliers: trapezoidal or square | Designation | 1966101 FMC 1,5/ 3-STF-3,5 |
Number of positions | 3 | Cross section range AWG | 24 ... 16 (Use copper wires rated 75° C (UL)) |
Supply voltage | 24 V DC (SELV) | Supply voltage range | 18 V DC ... 32 V DC (PELV/SELV)
9 V DC ... 32 V DC (PELV/SELV (from HW version 05)) |
Supply current | typ. 120 mA (at 24 V DC) | Current consumption | max. 250 mA (at 18 V DC)
max. 400 mA (at 9 V DC) |
Connection method | Push-in spring connection | Conductor cross section, rigid | 0.2 mm² ... 1.5 mm² |
Conductor cross section, flexible | 0.2 mm² ... 1.5 mm² | Conductor cross section AWG | 24 ... 16 |
Stripping length | 10 mm | Number | 2 |
Connection method | permanently installed | Note on the connection method | MIMO |
Gain | 5 dBi | Operating modes | Access Point / Client Adapter / Repeater |
Configuration | Web-based management, automated CLI | Quality of service (QoS) | Yes |
Security | 802.11i
WPA PSK (preshared key)
WPA2
AES
TKIP
MAC filter
Supports 802.1X/RADIUS | Wireless licenses | Europe, additional countries in the e-shop |
Country support | Belgium
Bulgaria
Denmark
Germany
Estonia
Finland
France
Greece
Great Britain
Ireland
Italy
Latvia
Liechtenstein
Lithuania
Luxembourg
Malta
Netherlands
Norway
Austria
Poland
Portugal
Romania
Sweden
Switzerland
Slovakia
Slovenia
Spain
Czech Republic
Hungary
Cyprus (rep.)
China
Japan
South Korea
Thailand
Brazil
Russia | Number of interfaces | 1 |
Connection method | RJ45 | Note on the connection method | Auto negotiation and autocrossing |
Transmission speed | 10/100 Mbps | Transmission physics | Copper |
Transmission length | 100 m (per segment) | No. of channels | 1 (RJ45 ports) |
Designation | Wireless LAN | Antenna connection method | (Internal) |
Frequency band | 2.4 GHz
5 GHz | Wireless standard | WLAN
IEEE 802.11
a
b
g
n
Wi-Fi 4 |
Transmission power | max. 20 dBm (EIRP) | Number of wireless interfaces | 1 IEEE 802. 11 a/b/g/n |
Wireless modules that can be connected | 10 (In Access Point mode max. 2 SSIDs) | Width | 62.8 mm |
Height | 36.5 mm | Depth | 113.2 mm |
Note on dimensions | Outside dimensions | Color | black |
Material base plate | Die-cast zinc, nickel-plated | Housing material | Polycarbonate, PC |
Ambient temperature (operation) | 0 °C ... 60 °C | Degree of protection | IP54 |
Note | Degree of protection when installed | Air pressure (operation) | 800 hPa ... 1080 hPa (up to 2000 m above sea level) |
Air pressure (storage/transport) | 660 hPa ... 1080 hPa (up to 3500 m above sea level) | Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Permissible humidity (operation) | 5 % ... 95 % (non-condensing) | Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
Standards/regulations | EN 61000-4-2 | Contact discharge | ± 4 kV |
Indirect discharge | ± 6 kV | Standards/regulations | EN 61000-4-3 |
Frequency range | 80 MHz ... 1000 MHz | Test field strength | 10 V/m |
Frequency range | 1000 MHz ... 6000 MHz | Test field strength | 3 V/m |
Standards/regulations | EN 61000-4-4 | Comments | ±2.2 kV |
Standards/regulations | EN 61000-4-5 | Signal | ± 0.5 kV (symmetrical)
± 1 kV (asymmetrical) |
Standards/regulations | EN 61000-4-6 | Frequency range | 0.15 MHz ... 80 MHz |
Voltage | 10 V | Standards/regulations | EN 55022 |
Test result | Class B | Mounting type | Single-hole mounting |
Assembly note | Internal antenna |
Specifications may be subject to change without notice