Phoenix Contact FL WLAN 1121

Selling Points

  • 1Supports 802.11 a, b, g, n, and ax standards for fast data transfer.
  • 2Operates on both 2.4 GHz and 5 GHz frequencies for optimal performance.
  • 3Designed for industrial applications with IP66/68 protection against dust and water.
  • 4Features single-hole mounting for easy integration into various systems.
  • 5Compatible with RJ45 for LAN, HTTP/HTTPS, CLI, and REST API configurations.
Product Details
FL WLAN 1121
Phoenix Contact

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

ParameterValueParameterValue
Note on application
Only for industrial use
CE note
The products are offered exclusively for export outside the EU and the European Economic Area.
Product type
Wireless module
Type
Stand-Alone
Article revision
02
Overvoltage category
II (IEC 61010-1)
Type
IEEE 802.11 a/b/g/n/ac/ax 2,4 GHz, 5 GHz > 600 MBit/s
Assembly note
Permanently installed
Maximum power dissipation for nominal condition
4.1 W
Test section
24 V supply / functional ground 500 V DC 1 min Ethernet interface/all other potentials 2.25 kV DC 1 min
Connection technology
COMBICON
Connection method
Push-in spring connection
Note on the connection method
Recommended conductor cross section: 0.75 mm² Recommended ferrule: connection length 10 mm Recommended crimping pliers: trapezoidal or square
Designation
1128752 FMC 1,5/ 3-ST-3,5-RF GY35BD1-3
Number of positions
3
Cross section range AWG
24 ... 16 (Copper cables classified for 85°C (UL))
Supply voltage
24 V DC (SELV)
Supply voltage range
9 V DC ... 32 V DC (PELV/SELV)
Supply current
typ. 170 mA (at Unom/ 20°C/ max. data throughput)
Current consumption
max. 620 mA (At Umin/Tmax/max. data throughput)
Connection method
Push-in spring connection
Conductor cross section, rigid
0.2 mm² ... 1.5 mm²
Conductor cross section, flexible
0.2 mm² ... 1.5 mm²
Conductor cross section AWG
24 ... 16
Stripping length
10 mm
Number
2
Connection method
permanently installed
Note on the connection method
MIMO
Gain
5 dBi
Configuration
Web-based management, automated CLI, REST API
Quality of service (QoS)
Yes
Wireless licenses
USA, Canada
Number of interfaces
1
Connection method
RJ45
Note on the connection method
Auto negotiation and autocrossing
Transmission speed
10/100/1000 Mbps
Transmission physics
Copper
Transmission length
100 m (per segment)
No. of channels
1 (RJ45 ports)
Designation
Wireless LAN
Antenna connection method
(Internal)
Frequency band
2.4 GHz 5 GHz
Wireless standard
WLAN IEEE 802.11 a b g n ac ax Wi-Fi 6
Number of wireless interfaces
1 IEEE 802.11 a/b/g/n/ac/ax
Wireless modules that can be connected
10 (In access point mode)
Width
62.8 mm
Height
36.5 mm
Depth
113.2 mm
Note on dimensions
Outside dimensions
Material base plate
Die-cast zinc, nickel-plated
Housing material
Polycarbonate, PC
Ambient temperature (operation)
-30 °C ... 60 °C
Degree of protection
IP65 (not UL-tested) IP66 (not UL-tested) IP67 (not UL-tested) IP68 (not UL-tested)
Note
Degree of protection when installed
Air pressure (operation)
800 hPa ... 1080 hPa (up to 2000 m above sea level)
Air pressure (storage/transport)
660 hPa ... 1080 hPa (up to 3500 m above sea level)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Standards/regulations
EN 61000-4-2
Contact discharge
± 6 kV
Discharge in air
± 8 kV
Indirect discharge
± 6 kV
Standards/regulations
EN 61000-4-3
Frequency range
80 MHz ... 1000 MHz
Test field strength
10 V/m
Frequency range
1000 MHz ... 6000 MHz
Test field strength
3 V/m
Standards/regulations
EN 61000-4-4
Comments
±2.2 kV
Standards/regulations
EN 61000-4-5
Signal
± 0.5 kV (symmetrical) ± 1 kV (asymmetrical)
Standards/regulations
EN 61000-4-6
Frequency range
0.15 MHz ... 80 MHz
Voltage
10 V
Standards/regulations
FCC/CFR 47, Part 15.107
Test result
Class B
Standards/regulations
FCC/CFR 47, Part 15.109
Test result
Class A
Standards/regulations
ICES-003 Issue 6 section 6.1
Test result
Class B
Standards/regulations
ICES-003 Issue 6 section 6.2
Test result
Class A
Mounting type
Single-hole mounting
Assembly note
Internal antenna

Specifications may be subject to change without notice