Product Model

FL WLAN 24 EC 802-11-US

In Stock
Last updated: 2025/4/19
Phoenix Contact FL WLAN 24 EC 802-11-US

Selling Points

  • 1IEEE 802.11 a/b/g Compatibility: Supports 2.4 GHz and 5 GHz frequencies for robust wireless connectivity.
  • 2Maximum Security: Ensures maximum security with AES encryption and compliance with IEEE 802.11i standards.
  • 3Web-Based Management: Offers multilingual web-based management for easy configuration and monitoring.
  • 4Antenna Diversity: Features integrated special antenna (EPA) for enhanced signal strength and reliability.
  • 5PoE Support: Operates on 24 V DC via Power over Ethernet (PoE) for convenient installation and power supply.
Product Details
FL WLAN 24 EC 802-11-US
Phoenix Contact

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

ParameterValueParameterValue
Product type
Wireless module
Type
Stand-Alone
Number
1
Type
IEEE 802.11a/b/g, 2.4 and 5 GHz to 54 Mbps
Assembly note
Permanently installed
Maximum power dissipation for nominal condition
9.6 W
Connection method
Via COMBICON
Supply voltage
24 V DC (PoE)
Supply voltage range
18.5 V DC ... 30.5 V DC
Supply current
400 mA (Recommended protection 2AT)
Interface
Ethernet
Number
1
Connection method
RJ45 jack
Number
2
Connection method
RSMA (male)
Operating modes
Ethernet client adapter
Configuration
Multilingual web-based interface (German/English) under http or https, with password protection
Automatic channel selection
yes
Quality of service (QoS)
Yes
Virtual LAN (VLAN) support 802.1Q
yes
Security
WEP 64 bit/128 bit WEPplus WPA TKIP 802.11i WPA2 (RSN,AES) WPA PSK (preshared key) WPA group & master rekeying
Wireless licenses
USA, Canada
Country support
USA Canada
Designation
Wireless card
Antenna connection method
RSMA (female)
Frequency band
2.4 GHz 5 GHz
Wireless standard
WLAN IEEE 802.11 a b g h
Transmission power
20 dBm (EIRP)
Number of wireless interfaces
1 IEEE 802.11 a/b/g
Wireless modules that can be connected
256 (More than)
Width
159 mm
Height
250 mm
Depth
65 mm
Degree of protection
IP65
Ambient temperature (operation)
-20 °C ... 55 °C
Air pressure (operation)
795 hPa ... 1080 hPa (up to 2000 m above sea level)
Permissible humidity (operation)
10 % ... 85 % (non-condensing)
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
Mounting type
Adapter plate Wall mounting on adapter plate
Assembly note
External OMNI omnidirectional antenna, the antennas can be exchanged

Specifications may be subject to change without notice