Product Model
IB IL 24 DO 2-2A-PAC
Selling Points
- 12 Digital Outputs: Connect actuators in 2, 3, and 4-wire technology.
- 224V DC Power: Nominal output voltage of 24V DC with a maximum output current of 2A per channel.
- 3Short-Circuit Proof: Overload and short-circuit protection for reliable operation.
- 4Diagnostic Indicators: Diagnostic and status indicators for easy monitoring.
- 5Durable Design: Operates in ambient temperatures from -25°C to 55°C and is IP20 rated for protection.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Width | 12.2 mm | Height | 119.8 mm |
Depth | 71.5 mm | Note on dimensions | Housing dimensions |
Note on application | Only for industrial use | CCCex note | Use in potentially explosive areas is not permitted in China. |
Number of interfaces | 2 | Connection method | Inline data jumper |
Transmission speed | 500 kbps | ID code (dec.) | 189 |
ID code (hex) | BD | Length code (hex) | C2 |
Length code (dec) | 194 | Process data channel | 2 bit |
Input address area | 0 bit | Output address area | 2 bit |
Register length | 2 bit | Required parameter data | 3 Byte |
Required configuration data | 4 Byte | Output name | Digital outputs |
Connection method | Spring-cage connection | Connection technology | 4-conductor |
Number of outputs | 2 | Protective circuit | Overload protection, short-circuit protection; electronic |
Output voltage | 24 V DC (U | Output current | max. 2 A (per channel)
max. 4 A (per device) |
Maximum output current per channel | 2 A | Maximum output current per module | 4 A |
Nominal output voltage | 24 V DC | Nominal load, inductive | 48 VA (1,2 H, 12 Ω) |
Nominal load, lamp | 48 W | Nominal load, ohmic | 48 W (12 Ω) |
Maximum operating frequency with ohmic nominal load | max. 300 Hz (this switching frequency is limited by the number of bus devices, the structure of the bus, the software used and the control or computer system used) | Reverse voltage resistance to short pulses | Reverse voltage proof |
Behavior with overload | Auto restart | Behavior with inductive overload | Output can be destroyed |
Behavior at voltage switch-off | The output follows the power supply without delay | Product type | I/O component |
Product family | Inline | Type | modular |
Scope of delivery | including Inline connector and labeling field | No. of channels | 2 |
Operating mode | Process data mode with 2 bits | Diagnostics messages | Short-circuit or overload of the digital outputs Error message in the diagnostic code (bus) and display (2 Hz) via the LED (D) on the module |
Article revision | 12 | Overvoltage category | II (IEC 60664-1, EN 60664-1) |
Pollution degree | 2 (IEC 60664-1, EN 60664-1) | Maximum power dissipation for nominal condition | 1.45 W |
Supply voltage | 7.5 V DC (via voltage jumper) | Current draw | max. 35 mA |
Supply voltage | 24 V DC (via voltage jumper) | Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
Current draw | max. 4 A | Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O) | 500 V AC, 50 Hz, 1 min |
Test voltage: 24 V supply (I/O) / functional ground | 500 V AC, 50 Hz, 1 min | Test voltage: 7.5 V supply (bus logic)/functional ground | 500 V AC, 50 Hz, 1 min |
Connection name | Inline connector | Connection method | Spring-cage connection |
Conductor cross section rigid | 0.08 mm² ... 1.5 mm² | Conductor cross section flexible | 0.08 mm² ... 1.5 mm² |
Conductor cross section AWG | 28 ... 16 | Stripping length | 8 mm |
Connection method | Spring-cage connection | Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² |
Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² | Conductor cross section AWG | 28 ... 16 |
Stripping length | 8 mm | Ambient temperature (operation) | -25 °C ... 55 °C |
Degree of protection | IP20 | Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) | Ambient temperature (storage/transport) | -25 °C ... 85 °C |
Permissible humidity (operation) | 10 % ... 95 % (non-condensing) | Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
Protection class | III (IEC 61140, EN 61140, VDE 0140-1) | Mounting type | DIN rail mounting |
Specifications may be subject to change without notice