Product Model
IB IL 24 LSKIP-PAC
Selling Points
- 1Extend Inline Local Bus: Seamlessly extend your Inline local bus over multiple rows using the IB IL 24 LSKIP-PAC.
- 2Reliable Data Transmission: Ensure data integrity with transmission speeds of 500 kbps / 2 Mbps via the RS-422 protocol.
- 3Robust Electrical Properties: Features surge protection, input protective diodes, and compliance with IP20 protection standards.
- 4Easy Installation: Mounts effortlessly on DIN rail, making it ideal for industrial applications.
- 5Comprehensive Accessories: Includes Inline connectors, marking fields, and remote bus cables for flexible installation options.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Width | 48.8 mm | Height | 135 mm |
Depth | 71.5 mm | Note on application | Only for industrial use |
Number of interfaces | 1 (incoming local bus) | Connection method | Inline shield connector |
Note on the connection method | Standard INTERBUS cable | Transmission speed | 500 kbps / 2 Mbps (Can be used in Inline stations with these transmission speeds) |
Transmission physics | Copper | Number of interfaces | 1 |
Connection method | Inline data jumper | Transmission speed | 500 kbps / 2 Mbps |
Number of local bus devices that can be connected | max. 63 (without additional power terminal block, observe allowable total current consumption) | Number of devices with parameter channel | 63 |
ID code (hex) | none | Input address area | 0 Byte |
Output address area | 0 Byte | Register length | 0 bit |
Required parameter data | 0 Byte | Required configuration data | 0 Byte |
Product type | I/O component | Product family | Inline |
Type | modular | Scope of delivery | including Inline connectors and marking fields |
Special properties | for extending the Inline local bus | Article revision | 06 |
Maximum power dissipation for nominal condition | 1.45 W | Protective circuit | Surge protection (segment supply, main supply, 24 V supply); Input protective diodes (can be destroyed by permanent overload)Pulse loads up to 1500 W are short circuited by the input protective diode.
Protection against polarity reversal (segment supply/main supply); Parallel diodes for protection against polarity reversal; in the event of an error the high current flowing through the diodes causes the fuse connected upstream to blow.
Polarity reversal (24 V supply); Serial diode in the lead path of the power supply unit; in the event of an error only a low current flows. In the event of an error, no fuse trips within the external power supply unit.
Short-circuit protection of the communications power; electronic
Short-circuit protection of the analog supply; electronic |
Supply voltage | 24 V DC (via Inline connector) | Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
Current draw | max. 1.25 A (at nominal voltage; consisting of: 0.75 A DC for the communications power and 0.5 A DC for the analog voltage supply)
min. 60 mA (without connected Inline I/O terminals) | Supply voltage | 7.5 V DC |
Supply voltage | 24 V DC (via voltage jumper) | Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
Supply voltage | 24 V DC (via Inline connector) | Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
Supply voltage | 24 V DC (via Inline connector) | Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
Test voltage: 5 V supply incoming local bus / 7.5 V communications power, 24 V analog power supply, 24 V power supply for generating voltages U | 500 V AC, 50 Hz, 1 min | Test voltage: 5 V supply incoming local bus / 24 V main supply, 24 V segment supply | 500 V AC, 50 Hz, 1 min |
Test voltage: 7.5 V communications power, 24 V analog power supply, 24 V power supply for generating voltages U | 500 V AC, 50 Hz, 1 min | Test voltage: 7.5 V communications power, 24 V analog power supply, 24 V power supply for generating voltages U | 500 V AC, 50 Hz, 1 min |
Test voltage: 24 V main supply, 24 V segment supply, 24 V power supply for generating voltages U | 500 V AC, 50 Hz, 1 min | Connection name | Inline connector |
Connection method | Spring-cage connection | Conductor cross section rigid | 0.08 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.08 mm² ... 1.5 mm² | Conductor cross section AWG | 28 ... 16 |
Stripping length | 8 mm | Connection method | Spring-cage connection |
Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² | Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
Conductor cross section AWG | 28 ... 16 | Stripping length | 8 mm |
Ambient temperature (operation) | -25 °C ... 55 °C | Degree of protection | IP20 |
Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) | Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Ambient temperature (storage/transport) | -25 °C ... 85 °C | Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) | Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Mounting type | DIN rail mounting |
Specifications may be subject to change without notice