Product Model
IB IL 24 SEG/F
Selling Points
- 1Automatic Segment Circuit Creation: Easily integrate into your main circuit to create a protected segment.
- 2Internal Fuse Protection: Safeguard your segment circuit with an internal slow-blow fuse.
- 3Diagnostic Indicators: Monitor your circuit's status with built-in diagnostic indicators.
- 424 V DC Power Supply: Operate at 24 V DC with a maximum current consumption of 6 A.
- 5Compact Design: Dimensions: 12.2 mm width, 119.8 mm height, and 71.5 mm depth for easy integration.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Type | modular | Number of plugs | 1 |
Protection class | III (IEC 61140, EN 61140, VDE 0140-1) | ID code (dec.) | none |
ID code (hex) | none | Register length | 0 bit |
Test section | 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min
5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min
7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min
24 V supply (I/O) / functional ground 500 V AC 50 Hz 1 min | Protective circuit | Overload protection; Fuse |
Fuse | SI 5 x 20 6, 300 AT (in scope of delivery) | I/O voltage | 24 V DC |
I/O voltage range | 19.2 V DC ... 30 V DC | Residual ripple | ± 1.2 V |
Max. current consumption | 6 A (8 A) | Supply voltage | 24 V DC |
Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) | Current draw | max. 6 A (nominal value) |
Supply voltage | 24 V DC -15 % / +20 % (in accordance with EN 61131-2) | Connection method | Spring-cage connection |
Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² | Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
Conductor cross section AWG | 28 ... 16 | Connection method | Inline potential distributor |
Connection method | Inline data jumper | Width | 12.2 mm |
Height | 119.8 mm | Depth | 71.5 mm |
Color | green | Degree of protection | IP20 |
Ambient temperature (operation) | -25 °C ... 55 °C | Ambient temperature (storage/transport) | -25 °C ... 85 °C |
Permissible humidity (operation) | 75 % ... 85 % (in the range of -25°C ... +55°C, appropriate measures against increased humidity (> 85%) must be taken.) | Permissible humidity (storage/transport) | 75 % ... 85 % (Slight temporary condensation may sometimes appear on the housing, e.g. when the terminal block is brought out of a vehicle into an enclosed room.) |
Mounting type | DIN rail mounting |
Specifications may be subject to change without notice