Product Model
IB IL DALI MM-V2-PAC
Selling Points
- 1Certified DALI-2 compliant for advanced lighting control.
- 2Multi-master capable for efficient communication with multiple devices.
- 3Integrated DALI power supply unit for convenient setup.
- 4Safe electrical isolation to protect against mains voltage up to 250 V AC.
- 5High transmission speed of 500 kbps for fast data transfer.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Width | 48.8 mm | Height | 119.8 mm |
Depth | 71.5 mm | Note on dimensions | Housing dimensions |
Note on application | Only for industrial use | Connection method | Inline data jumper |
Transmission speed | 500 kbps | Designation | DALI |
Connection method | Inline connector | Supply voltage | typ. 15 V DC (Bus voltage) |
Output current with short-circuit | max. 250 mA | Current carrying capacity | max. 220 mA (Bus load) |
Transmission speed | 1200 bps | Type of protection | Bus protected up to 250 V AC, maximum |
ID code (dec.) | 191 | ID code (hex) | BF |
Length code (hex) | 06 | Length code (dec) | 06 |
Process data channel | 96 bit | Input address area | 12 Byte |
Output address area | 12 Byte | Register length | 96 bit |
Product type | I/O component | Product family | Inline |
Type | modular | Scope of delivery | including Inline connectors and marking fields |
Special properties | Multi-master-capable
integrated DALI power supply unit | Diagnostics messages | Yes No I/O error; DALI-specific error at application level |
Article revision | 03 | Power consumption | 3.5 W (The amount of power dissipation is heavily dependent on the bus activity, which is only influenced by the terminal itself to a limited extent. The maximum power dissipation is reached when other devices occupy the DALI bus with minimum pauses and the terminal itself does not transmit, and at the same time the DALI current of 220 mA is used in full.) |
Supply voltage | 7.5 V DC (via voltage jumper) | Current draw | max. 75 mA |
Supply voltage | 24 V DC (via voltage jumper) | Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
Current draw | max. 230 mA | Test voltage: 7.5 V supply (bus logic)/24 V supply (I/O), and functional ground (FE) | 500 V AC, 50 Hz, 1 min |
Test voltage: 7.5 V supply (bus logic)/DALI bus | 1.5 kV AC, 50 Hz, 1 min | Test voltage: 24 V supply (I/O)/DALI bus | 1.5 kV AC, 50 Hz, 1 min |
Connection name | Inline connector | Connection method | Spring-cage connection |
Conductor cross section rigid | 0.2 mm² ... 1.5 mm² | Conductor cross section flexible | 0.08 mm² ... 1.5 mm² |
Conductor cross section AWG | 24 ... 16 | Stripping length | 8 mm |
Connection method | Spring-cage connection | Conductor cross section, rigid | 0.2 mm² ... 1.5 mm² |
Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² | Conductor cross section AWG | 24 ... 16 |
Stripping length | 8 mm | Ambient temperature (operation) | -25 °C ... 55 °C |
Degree of protection | IP20 | Air pressure (operation) | 80 kPa ... 106 kPa (up to 2000 m above sea level) |
Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) | Ambient temperature (storage/transport) | -25 °C ... 85 °C |
Permissible humidity (operation) | 10 % ... 95 % (according to DIN EN 61131-2) | Permissible humidity (storage/transport) | 10 % ... 95 % (according to DIN EN 61131-2) |
Protection class | III (IEC 61140, EN 61140, VDE 0140-1) | Mounting type | DIN rail mounting |
Specifications may be subject to change without notice