Product Model
IB IL IMPULSE-IN-PAC
Selling Points
- 1Position resolution of 5 µm for precise measurements.
- 2Supports ultrasonic encoder speeds of 2,500 m/s to 2,999.99 m/s.
- 3Compatible with inductive length measuring scales via impulse interface (P interface).
- 4Ensures reliable data transmission with a shielded connection.
- 5Includes 24V encoder supply with monitoring for reliable operation.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Width | 12.2 mm | Height | 135 mm |
Depth | 71.5 mm | Note on application | Only for industrial use |
Number of interfaces | 2 | Connection method | Inline data jumper |
Transmission speed | 500 kbps | ID code (dec.) | 95 |
ID code (hex) | 5F | Length code (hex) | 02 |
Length code (dec) | 02 | Process data channel | 32 bit |
Input address area | 4 Byte | Output address area | 4 Byte |
Register length | 32 bit | Required parameter data | 6 Byte |
Required configuration data | 5 Byte | Product type | I/O component |
Product family | Inline | Type | modular |
Operating mode | Process data operation with 2 words | Diagnostics messages | Failure or overload of the encoder supply I/O error message |
Article revision | 07 | Overvoltage category | II (IEC 60664-1, EN 60664-1) |
Pollution degree | 2 (IEC 60664-1, EN 60664-1) | Maximum power dissipation for nominal condition | 0.85 W |
Number | 1 | Nominal output voltage | 24 V DC |
Voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) | Current carrying capacity | max. 250 mA |
Protective circuit | Short-circuit protection; Electronic and thermal | Supply voltage | 7.5 V DC (via voltage jumper) |
Current draw | max. 70 mA | Supply voltage | 24 V DC (via voltage jumper) |
Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) | Current draw | max. 250 mA
typ. 150 mA (with connected sensor) |
Test voltage: 7.5 V supply (bus logics) / I/O area | 500 V AC, 50 Hz, 1 min | Test voltage: 7.5 V supply (bus logic)/functional ground | 500 V AC, 50 Hz, 1 min |
Test voltage: 24 V supply (I/O) / functional ground | 500 V AC, 50 Hz, 1 min | Connection name | Inline connector |
Connection method | Spring-cage connection | Conductor cross section rigid | 0.08 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.08 mm² ... 1.5 mm² | Conductor cross section AWG | 28 ... 16 |
Stripping length | 8 mm | Connection method | Spring-cage connection |
Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² | Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
Conductor cross section AWG | 28 ... 16 | Stripping length | 8 mm |
Ambient temperature (operation) | -25 °C ... 55 °C | Degree of protection | IP20 |
Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) | Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Ambient temperature (storage/transport) | -25 °C ... 85 °C | Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) | Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Mounting type | DIN rail mounting |
Specifications may be subject to change without notice