Product Model
IB IL PWM/2
Selling Points
- 1Control multiple outputs independently with two separate channels.
- 2Set period lengths from 100 µs to 10 s and duty factors in 0.39% increments.
- 3Generate frequencies between 0 Hz and 50 kHz for precise control.
- 4Set pulse lengths from 10 µs to 25.5 s for precise timing.
- 5Operate at 5 V or 24 V for versatility in various applications.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Type | modular | Number of plugs | 2 |
Operating mode | Process data operation with 2 words | Error messages via the bus | Short-circuit or overload of the output |
ID code (dec.) | 191 | ID code (hex) | BF |
Register length | 32 bit | Required parameter data | 1 Byte |
Test section | 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min
5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min
7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min
24 V supply (I/O) / functional ground 500 V AC 50 Hz 1 min | I/O voltage | 24 V DC (via voltage jumper) |
I/O voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) | Residual ripple | 5 % |
Typical current consumption | approx. 100 mA | Number of inputs | 0 |
Output voltage | 5 V DC | Output current | 10 mA (5 V)
500 mA (24 V) |
Number of outputs | 2 | Output voltage | 24 V |
Maximum switching voltage | 24 V (to segment circuit) | Output voltage | 5 V |
Connection method | Spring-cage connection | Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² |
Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² | Conductor cross section AWG | 28 ... 16 |
Connection method | Inline data jumper | Transmission speed | 500 kbps |
Transmission physics | Copper | Width | 24.4 mm |
Height | 119.8 mm | Depth | 71.5 mm |
Degree of protection | IP20 | Ambient temperature (operation) | -25 °C ... 55 °C |
Ambient temperature (storage/transport) | -25 °C ... 85 °C | Permissible humidity (operation) | 75 % ... 85 % (in the range of -25°C ... +55°C, appropriate measures against increased humidity (> 85%) must be taken.) |
Permissible humidity (storage/transport) | 75 % ... 85 % (Slight temporary condensation may sometimes appear on the housing, e.g. when the terminal block is brought out of a vehicle into an enclosed room.) | Mounting type | DIN rail mounting |
Specifications may be subject to change without notice