Product Model
IBS RL 24 DIO 8/8/8-R-LK
Selling Points
- 1Durable zinc die-cast housing ensures IP67 protection for harsh ambient conditions.
- 2Advanced diagnostic capabilities for maximum system availability.
- 3High-speed fiber optic transmission with 500 kbaud or 2 Mbaud options.
- 4Easy sensor/actuator connection via 5-pos. M12 female connectors.
- 5Safeguards each input and output group against short circuits and overloads.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Width | 179 mm | Height | 67 mm |
Depth | 71 mm | Note on dimensions | with bus connection plugs and mounting panel |
Connection method | Optic fiber (polymer fiber 980/1000 µm) | Transmission speed | 500 kbps |
Transmission physics | FO | Input name | Digital inputs |
Number of inputs | 8 | Connection technology | 2-, 3-, 4-conductor |
Input voltage range "0" signal | -30 V DC ... 5 V DC | Input voltage range "1" signal | 11 V DC ... 30 V DC |
Typical input current per channel | 3 mA | Delay at signal change from 0 to 1 | 1.5 ms |
Delay at signal change from 1 to 0 | 3.5 ms | Protective circuit | Electronic short-circuit/overload protection for each group |
Output name | Digital outputs | Connection technology | 2-, 3-conductor |
Number of outputs | 8 | Protective circuit | Electronic short-circuit/overload protection for each channel |
Output voltage | 24 V | Maximum output current per group | 2 A |
Maximum output current per channel | 500 mA | Nominal output voltage | 24 V |
Output voltage when switched off | max. 0.5 V | Output current when switched off | 0 A |
Nominal load, inductive | 12 VA (1.2 H, 48 Ω) | Nominal load, lamp | 12 W |
Nominal load, ohmic | 12 W | Maximum operating frequency with ohmic nominal load | max. 1 kHz |
Behavior with overload | Auto restart | Behavior with inductive overload | Output can be destroyed |
Overcurrent shut-down | min. 0.7 A | Output current with ground connection interrupt when switched off | 0 mA |
Product type | I/O component | Product family | Ruggedline |
Type | Block design | No. of channels | 16 |
Supply voltage | 24 V DC | Supply voltage range | 18.5 V DC ... 32 V DC (including ripple) |
Supply current | typ. 120 mA (plus sensor current) | Ripple | Max 3.6 V |
Test voltage: Between bus logic and outputs | 500 V AC, 50 Hz, 1 min | Connection method | QUICKON fast connection |
Ambient temperature (operation) | -20 °C ... 55 °C | Degree of protection | IP65/IP67 |
Note | Seal unused slots/connections to ensure the degree of protection. | Air pressure (operation) | 860 hPa ... 1080 hPa (up to 1500 m above sea level) |
Air pressure (storage/transport) | 660 hPa ... 1080 hPa (up to 3500 m above sea level) | Ambient temperature (storage/transport) | -25 °C ... 70 °C |
Permissible humidity (operation) | 100 % | Permissible humidity (storage/transport) | 95 % (non-condensing) |
Protection class | III (IEC 61140, EN 61140, VDE 0140-1) | Mounting type | Wall mounting |
Specifications may be subject to change without notice