Product Model
IBS RL 400 MLR R DIO6/1 LK
Selling Points
- 1Utilizes 500 kbaud fiber optic technology for high-speed communication.
- 2Includes an integrated motor protection relay for 220 V AC to 440 V AC, up to 8 A.
- 3Equipped with a rugged metal housing offering IP67 protection against dust and water.
- 4Features comprehensive diagnostic functions including motor current monitoring and error message display.
- 5Offers multiple input and output connections via M12 connectors and POWER-COMBICON terminal strips.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Width | 185.1 mm | Height | 193 mm |
Depth | 138 mm | Connection method | Fiber optics |
Transmission speed | 500 kbps | ID code (dec.) | 3 |
ID code (hex) | 03 | Length code (hex) | 01 |
Length code (dec) | 1 | Process data channel | 16 bit |
Input address area | 2 Byte | Output address area | 2 Byte |
Register length | 2 Byte | Number of inputs | 6 |
Connection method | M12 connector | Connection technology | 3-, 4-conductor |
Number of positions | 5 | Input voltage | 24 V DC (DIN EN 61131-2) |
Input voltage range "0" signal | 0 V ... 5 V | Input voltage range "1" signal | 11 V ... 30 V |
Filter time | 3 ms | Typical input current per channel | 5 mA (for U |
Product type | I/O component | Product family | Ruggedline |
Type | Block design | Diagnostics messages | Mains failure, phase failure, blown fuse Error message in diagnostic code (bus) and display by means of the E LED on the motor starter
Motor connector not plugged in, motor temperature exceeded, thermistor line short-circuited Error message in diagnostic code (bus) and display by means of the E LED on the motor starter
Sensor supply failure Error message in diagnostic code (bus) and display by means of the E LED on the motor starter
Failure of the actuator supply Error message in diagnostic code (bus) and display by means of the E LED on the motor starter
Motor overcurrent Error message in diagnostic code (bus) and display by means of the E LED on the motor starter
Output stage cannot be controlled Error message in diagnostic code (bus) and display by means of the E LED on the motor starter
Module error during self test Message to the master |
Supply voltage | 24 V DC | Supply voltage range | 18.5 V DC ... 32 V DC (including ripple) |
Ripple | 3.6 V | Connection method | M12 connector |
Degree of protection | IP65/IP67 | Ambient temperature (operation) | 0 °C ... 55 °C |
Air pressure (operation) | 860 hPa ... 1080 hPa (up to 1500 m above sea level) | Air pressure (storage/transport) | 660 hPa ... 1080 hPa (up to 3500 m above sea level) |
Ambient temperature (storage/transport) | -25 °C ... 70 °C | Permissible humidity (operation) | 100 % |
Permissible humidity (storage/transport) | 95 % (non-condensing) | Protection class | I (IEC 61140, EN 61140, VDE 0140-1) |
Air clearances and creepage distances | in accordance with EN 50178: 1998 | Mounting type | on mounting panel
Wall mounting |
Specifications may be subject to change without notice