Product Model
ILB PN 24 DI16 DIO16-EF
Selling Points
- 132 digital inputs with 16 freely selectable and 16 fixed inputs.
- 216 digital outputs with 24 V DC, 500 mA.
- 32 RJ45 jacks at a 45° angle for easy connectivity.
- 4Compatible with PROFINET networks for efficient data transfer.
- 5IP20 degree of protection for reliable operation in various environments.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Width | 156 mm | Height | 141 mm |
Depth | 57 mm | Note on dimensions | Specfications with connectors |
No. of channels | 2 | Connection method | RJ45 jack |
Note on the connection method | Autonegotiation and autocrossing, X2: internally crossed to enable “Fast Startup” with patch cable | Designation connection point | X1, X2 |
Transmission speed | 100 Mbps (acc. to PROFINET standard) | Transmission physics | Ethernet in RJ45 twisted pair |
Device function | PROFINET device | Specification | Version 2.3 |
Update rate | min. 1 ms (up to max. 512 ms, adjustable) | Conformance Class | C |
Input name | Digital inputs | Description of the input | EN 61131-2 types 1 and 3 |
Number of inputs | 32 (16 fixed and 16 freely selectable) | Connection method | Inline connector |
Connection technology | 3-conductor | Input voltage | 24 V DC |
Input voltage range "0" signal | -3 V DC ... 5 V DC | Input voltage range "1" signal | 11 V DC ... 30 V DC |
Nominal input voltage U | 24 V DC | Nominal input current at U | approx. 2.4 mA |
Typical input current per channel | typ. 5 mA | Typical response time | approx. 500 µs |
Output name | Digital outputs | Connection method | Inline connector |
Connection technology | 2-conductor | Number of outputs | 16 |
Protective circuit | Short-circuit and overload protection; Free-wheeling diode, integrated per channel | Output voltage | 24 V DC -1 V (At nominal current) |
Limitation of the voltage induced on circuit interruption | -25.8 V ... -15 V | Maximum output current per channel | 500 mA |
Maximum output current per module | 8 A | Nominal output voltage | 24 V DC |
Output current when switched off | max. 300 µA (When not loaded, a voltage can be measured even at an output that is not set.) | Nominal load, inductive | 12 VA (1.2 H, 48 Ω) |
Nominal load, lamp | 12 W | Nominal load, ohmic | 12 W (48 Ω) |
Reverse voltage resistance to short pulses | limited protection up to 0.5 A for 1 s | Behavior with overload | Auto restart |
Behavior with inductive overload | Output can be destroyed | Behavior at voltage switch-off | The output follows the power supply without delay |
Overcurrent shut-down | as of 0.7 A | Product type | I/O component |
Product family | Inline | Type | Block design |
Scope of delivery | including Inline connector | Special properties | PROFINET, -IRT, -MRP, -Fast Startup |
Diagnostics messages | Short-circuit or overload of the digital outputs Message in the diagnostics register
Short circuit sensor supply U
Sensor supply U
Sensor supply U | Overvoltage category | II |
Designation | Logic (U | Connection method | Inline connector |
Supply voltage | 24 V DC | Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
Current consumption | max. 75 mA | Designation | Sensor supply (U |
Connection method | Inline connector | Supply voltage | 24 V DC |
Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) | Current consumption | max. 4 A (max. 2 A from U |
Designation | Actuator supply (U | Connection method | Inline connector |
Supply voltage | 24 V DC | Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
Current consumption | max. 8 A (max. 4 A from U | Test voltage: I/Os / logic | 500 V AC, 50 Hz, 1 min |
Test voltage: I/O/functional ground | 500 V AC, 50 Hz, 1 min | Test voltage: Logic/functional ground | 500 V AC, 50 Hz, 1 min |
Test voltage: Ethernet interface signals / logic | 1500 V AC, 50 Hz, 1 min | Connection name | Inline connector |
Connection method | Spring-cage connection | Conductor cross section rigid | 0.08 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.08 mm² ... 1.5 mm² | Conductor cross section AWG | 28 ... 16 |
Stripping length | 8 mm | Connection method | Spring-cage connection |
Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² | Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
Conductor cross section AWG | 28 ... 16 | Stripping length | 8 mm |
Ambient temperature (operation) | -25 °C ... 60 °C | Degree of protection | IP20 |
Air pressure (operation) | 80 kPa ... 108 kPa (up to 2000 m above sea level) | Air pressure (storage/transport) | 66 kPa ... 108 kPa (up to 3500 m above sea level) |
Ambient temperature (storage/transport) | -25 °C ... 85 °C | Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) | Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Mounting type | DIN rail mounting |
Specifications may be subject to change without notice