Product Model
MINI-PS- 10- 42AC/15-60DC/3
Selling Points
- 1Compact design with a width of just 22.5 mm.
- 2Wide input voltage range: 10 V AC to 42 V AC.
- 3High efficiency: >95.7% for 42 V AC and nominal values.
- 4Reliable operation with MTBF >18,175,000 hours at 40 °C.
- 5Versatile output voltage range: 15 V DC to 60 V DC.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Product type | Power module | MTBF (IEC 61709, SN 29500) | > 18175000 h (40 °C) |
Article revision | 00 | Protection class | III |
Degree of pollution | 2 | Number of phases | 1.00 |
Input voltage | 24 V AC | Nominal input voltage range | 10 V AC ... 42 V AC |
Input voltage range | 10 V AC ... 42 V AC | Wide-range input | yes |
Input voltage range AC | 0 V AC ... 42 V AC | Voltage type of supply voltage | AC |
Inrush current | < 45 A (typical) | Inrush current integral (I | 8 A |
AC frequency range | 45 Hz ... 65 Hz | Current consumption | 6.5 A |
Permissible backup fuse | C16 1 x circuit breaker | Recommended breaker for input protection | 16 A (Characteristic C) |
Efficiency | > 95.7 % (For 42 V AC and nominal values) | Nominal output voltage | 28 V DC ±1 %
60 V DC |
Output voltage range | 15 V DC ... 60 V DC | Nominal output current (I | 3 A (-25 °C ... 60 °C) |
Derating | 60 °C ... 70 °C (2.5 %/K) | Residual ripple | < 3.6 V |
Output power | 72 W | Maximum no-load power dissipation | < 0.04 W |
Power loss nominal load max. | < 6.9 W | Connection in series | no |
Connection method | Pluggable screw connection | Conductor cross section, rigid min. | 0.2 mm² |
Conductor cross section, rigid max. | 2.5 mm² | Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² | Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 12 | Stripping length | 7 mm |
Screw thread | M3 | Tightening torque, min | 0.5 Nm |
Tightening torque max | 0.6 Nm | Connection method | Pluggable screw connection |
Conductor cross section, rigid min. | 0.2 mm² | Conductor cross section, rigid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² | Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 | Conductor cross section AWG max. | 12 |
Stripping length | 7 mm | Screw thread | M3 |
Tightening torque, min | 0.5 Nm | Tightening torque max | 0.6 Nm |
Width | 22.5 mm | Height | 99 mm |
Depth | 107 mm | Installation distance right/left | 0 mm / 0 mm (≤ 70 °C) |
Installation distance top/bottom | 50 mm / 50 mm (≤ 70 °C) | Housing material | Plastic |
Housing material | Polyamide (PA) | Type of housing | Polyamide PA, color: green |
Degree of protection | IP20 | Ambient temperature (operation) | -25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K) |
Ambient temperature (storage/transport) | -40 °C ... 85 °C | Climatic class | 3K3 (in acc. with EN 60721) |
Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) | Shock | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (operation) | < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
15 Hz ... 150 Hz, 2.3g | UL approvals | UL/C-UL listed UL 508
UL/C-UL Recognized UL 60950-1 |
SIL in accordance with IEC 61508 | 0 | Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Low Voltage Directive | Conformance with Low Voltage Directive 2014/35/EC | Noise immunity | EN 61000-6-2:2005 |
Noise emission | EN 55011 (EN 55022) | Standards/regulations | EN 61000-4-2 |
Housing | > Level 3 | Contact discharge | 8 kV (Contact discharge) |
Discharge in air | 8 kV (Air discharge) | Comments | Criterion B |
Standards/regulations | EN 61000-4-3 | Frequency range | 80 MHz ... 3 GHz |
Test field strength | 10 V/m | Comments | Criterion A |
Standards/regulations | EN 61000-4-4 | Input | 4 kV (level 4 - asymmetrical: conductor to ground) |
Output | 2 kV (level 3 - asymmetrical: conductor to ground) | Signal | 1 kV (Level 2 - asymmetrical cable to ground) |
Comments | Criterion B | Standards/regulations | EN 61000-4-5 |
Input | 2 kV (Level 3)
1 kV (Level 3) | Rail applications | EN 50121-4 |
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations | EN 50178/VDE 0160 (PELV) | Standard - Electrical safety | EN 60950-1/VDE 0805 (SELV) |
Assembly note | alignable: horizontally 0 mm, vertically 50 mm | Mounting position | horizontal DIN rail NS 35, EN 60715 |
With protective coating | no |
Specifications may be subject to change without notice