Product Model
PLC-OSP-110DC/300DC/ 1
Selling Points
- 1Wear-free switching with no contact bounce.
- 2Resistant to vibrations and shocks.
- 3Protective circuit in input and output.
- 4DC voltage outputs up to 300 V DC/1 A.
- 5Rapid response time of 0.4 ms for quick and reliable switching.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
EMC note | EMC: class A product, see manufacturer's declaration in the download area | Product type | Solid-state relay module |
Product family | PLC-INTERFACE | Application | With integrated solid-state relay |
Operating mode | 100% operating factor | Date of last data management | 27.05.2024 |
Insulation | Basic insulation | Overvoltage category | III |
Pollution degree | 2 | Rated insulation voltage | 300 V |
Rated surge voltage | 2.5 kV | Nominal input voltage U | 110 V DC |
Input voltage range in reference to U | 0.8 ... 1.2 | Input voltage range | 88 V DC ... 132 V DC |
Switching threshold "0" signal in reference to U | ≤ 0.4 | Switching threshold "1" signal in reference to U | ≥ 0.8 |
Typical input current at U | 5 mA | Typical response time | 0.4 ms |
Typical turn-off time | 0.7 ms | Operating voltage display | Yellow LED |
Protective circuit | Reverse polarity protection; Polarity protection diode
Surge protection; Varistor | Transmission frequency | 50 Hz |
Designation | Output data | Contact switching type | 1 N/O contact |
Design of digital output | electronic | Output voltage range | 12 V DC ... 300 V DC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) |
Limiting continuous current | 1 A (see derating curve) | Voltage drop at max. limiting continuous current | < 500 mV |
Protective circuit | Reverse polarity protection; Polarity protection diode
Surge protection; Varistor | Connection method | Spring-cage connection |
Stripping length | 8 mm | Conductor cross section rigid | 0.14 mm² ... 2.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 2.5 mm² | Conductor cross section AWG | 26 ... 14 |
Connection method | Spring-cage connection | Stripping length | 8 mm |
Conductor cross section rigid | 0.14 mm² ... 2.5 mm² | Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
Conductor cross section AWG | 26 ... 14 | Width | 6.2 mm |
Height | 80 mm | Depth | 86 mm |
Color | green (RAL 6021) | Flammability rating according to UL 94 | V0 (Housing) |
Ambient temperature (operation) | -25 °C ... 60 °C | Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Standards/regulations | IEC 60664
EN 50178 | Assembly note | in rows with zero spacing |
Mounting position | any |
Specifications may be subject to change without notice