Phoenix Contact PLC-RPT-230AC/21-21/SO46/HI

Selling Points

  • 1Operates efficiently at 230VAC nominal input with a maximum power dissipation of 1.04W.
  • 2Mechanical service life of 3x 107 cycles ensures long-lasting performance.
  • 3Push-in connection method for easy and secure terminal block connections.
  • 4Suitable for filter applications to prevent interference, with defined activation and deactivation thresholds.
  • 5Compact dimensions of 14mm width, 80mm height, and 94mm depth for easy mounting on DIN rails.
Product Details
PLC-RPT-230AC/21-21/SO46/HI
Phoenix Contact

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

ParameterValueParameterValue
Product type
Relay Module
Product family
PLC-INTERFACE
Application
Filter to prevent interference
Operating mode
100% operating factor
Mechanical service life
3x 10
Date of last data management
08.07.2024
Article revision
04
Insulation
Basic insulation Safe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths
Overvoltage category
III
Pollution degree
2
Maximum power dissipation for nominal condition
1.04 W
Test voltage (Winding/contact)
4 kV AC (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact)
2.5 kV AC (50 Hz, 1 min., changeover contact/changeover contact)
Rated surge voltage
4 kV
Nominal input voltage U
230 V AC
Input voltage range
190 V AC ... 264 V AC (20 °C)
Nominal voltage (plugged-in electromechanical relay)
110 V DC
Switch-on threshold
190 V AC
Switch-off threshold
170 V AC
Drive and function
monostable
Drive (polarity)
polarized
Typical input current at U
14 mA (50 Hz)
Input power dissipation for U
3 VA
Typical response time
10 ms
Typical release time
8 ms
Protective circuit
Bridge rectifier
Input circuit
RC element with threshold value switch
Operating voltage display
Yellow LED
Contact switching type
2 changeover contacts
Type of switch contact
Single contact
Contact material
AgNi
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage
5 V AC/DC (10 mA)
Limiting continuous current
6 A
Maximum inrush current
15 A (300 ms)
Min. switching current
10 mA (5 V)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC) 85 W (at 48 V DC) 60 W (at 60 V DC) 44 W (at 110 V DC) 57 W (at 220 V DC) 1500 VA (for 250 V AC)
Switching capacity
2 A (at 24 V, DC13) 0.2 A (at 250 V, DC13) 3 A (at 24 V, AC15) 3 A (at 120 V, AC15) 3 A (at 250 V, AC15)
Connection method
Push-in connection
Stripping length
10 mm
Conductor cross section rigid
0.14 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm² 0.2 mm² ... 2.5 mm² (Single ferrule) 2x 0.5 mm² ... 1 mm² (TWIN ferrule)
Conductor cross section AWG
26 ... 14
Width
14 mm
Height
80 mm
Depth
94 mm
Color
gray (RAL 7042)
Flammability rating according to UL 94
V0 (Housing)
Degree of protection (Relay)
RT III (Relay)
Degree of protection (Relay base)
IP20 (Relay base)
Degree of protection (Installation location)
≥ IP54 (Installation location)
Ambient temperature (operation)
-40 °C ... 50 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Altitude
≤ 2000 m
Certificate
CE-compliant
Certificate
UKCA-compliant
Certificate
TAE0000196
Identification
ISA-S71.04. G3 Harsh Group EN 60068-2-60
Temperature
D
Humidity
A
Vibration
B/C
EMC
B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
Electromagnetic compatibility
Conformance with EMC directive
Low Voltage Directive
Conformance with Low Voltage Directive
Standards/regulations
IEC 60947-5-1
Mounting type
DIN rail mounting
Assembly note
in rows with zero spacing
Mounting position
any

Specifications may be subject to change without notice