Product Model
PLC-RSP-230UC/ 1/SEN
Selling Points
- 1Efficient connection to system cabling using V8 adapter.
- 2Safe isolation according to DIN EN 50178 between coil and contact.
- 3High reliability with 2 x 10^7 mechanical service life cycles.
- 4Compact design with dimensions of 6.2 mm x 80 mm x 94 mm.
- 5Compatible with 230 V AC and 220 V DC input voltages.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Product type | Relay Module | Product family | PLC-INTERFACE |
Operating mode | 100% operating factor | Mechanical service life | 2x 10 |
Date of last data management | 20.04.2023 | Overvoltage category | III |
Pollution degree | 3 | Test voltage (Winding/contact) | 4 kV AC (50 Hz, 1 min., winding/contact) |
Nominal input voltage U | 230 V AC/DC
220 V DC | Typical input current at U | 3.2 mA |
Typical response time | 7 ms | Typical release time | 15 ms |
Protective circuit | Bridge rectifier | Operating voltage display | yes |
Contact switching type | 1 changeover contact | Type of switch contact | Single contact |
Contact material | AgSnO | Maximum switching voltage | 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) |
Minimum switching voltage | 12 V AC/DC | Limiting continuous current | 6 A |
Maximum inrush current | on request | Min. switching current | 10 mA |
Interrupting rating (ohmic load) max. | 140 W (at 24 V DC)
20 W (at 48 V DC)
18 W (at 60 V DC)
23 W (at 110 V DC)
40 W (at 220 V DC)
1500 VA (for 250 V AC) | Connection method | Spring-cage connection |
Stripping length | 8 mm | Conductor cross section rigid | 0.14 mm² ... 2.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 2.5 mm² | Conductor cross section AWG | 26 ... 14 |
Connection method | Spring-cage connection | Stripping length | 8 mm |
Conductor cross section rigid | 0.14 mm² ... 2.5 mm² | Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
Conductor cross section AWG | 26 ... 14 | Width | 6.2 mm |
Height | 80 mm | Depth | 94 mm |
Color | green (RAL 6021) | Flammability rating according to UL 94 | V0 (Housing) |
Ambient temperature (operation) | -20 °C ... 55 °C | Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Standards/regulations | IEC 60664
IEC 60664A
DIN VDE 0110
DIN EN 50178/VDE 0160 (in relevant parts)
IEC 60255/DIN VDE 0435 (in relevant parts)
DIN EN 50178/VDE 0160 | Assembly note | in rows with zero spacing |
Mounting position | any |
Specifications may be subject to change without notice