Product Model
PLC-V8C/PT-24DC/EM
Selling Points
- 1Highly Expandable: Connect up to two extension modules to a basic module for a total of 48 I/Os.
- 2Robust Design: Built with a durable gray color, suitable for various mounting positions.
- 3Efficient Power Supply: Operates within a 19.2V DC to 26.4V DC voltage range with a maximum input current of 65mA.
- 4Advanced Protection: Equipped with reverse polarity protection and surge protection for enhanced reliability.
- 5Flexible Connectivity: Compatible with 8 PLC-INTERFACE terminal blocks via push-in connections for easy integration.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. | EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Product type | Extension module | Product family | PLC logic |
Operating mode | 100% operating factor | Article revision | 07 |
Insulation | Basic insulation | Overvoltage category | III |
Pollution degree | 2 | Rated insulation voltage | 50 V |
Rated surge voltage | 0.8 kV | Supply voltage | 24 V DC |
Supply voltage range | 19.2 V DC ... 26.4 V DC | Maximum input current at U | 65 mA |
Protective circuit | Reverse polarity protection
Surge protection | Number of inputs | 8 (2 configurable as analog) |
Description of the input | EN 61131-2, type 3 | Input voltage | 24 V DC |
Signal level "0" signal | < 5 V | Signal level "1" signal | > 11 V |
Input current "0" signal | < 1 mA | Input current "1" signal | typ. 2.5 mA |
Status display | LED (yellow) | Number of inputs | 2 (IN6 and IN7 are configurable as analog) |
Input voltage range | 0 V ... 10 V | Input resistance | > 3.5 kΩ |
Number of inputs | ≤ 8 | Description of the input | technical data depends on the PLC-INTERFACE terminal block used |
Input voltage | 19 V DC | Typical current consumption | 4 mA |
Input resistance | < 100 mΩ | Number of outputs | ≤ 8 |
Nominal output voltage | 24 V DC | Nominal current | 9 mA |
Connection method | Push-in connection | Stripping length | 9 mm |
Number of connections | 1 | Number of positions | 10 |
Note | Device supply and 8 x inputs | Conductor cross section rigid | 0.14 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 1.5 mm²
0.25 mm² ... 0.5 mm² (Ferrule with plastic sleeve)
0.25 mm² ... 1.5 mm² (Ferrule without plastic sleeve) | Conductor cross section AWG | 26 ... 16 |
Connection method | Insulation displacement connection | Number of connections | 1 |
Number of positions | 4 | Status display | LED (green) |
Width | 50 mm | Height | 48.5 mm
111 mm (with relay) |
Depth | 82.5 mm
87 mm (with relay) | Color | gray (RAL 7042) |
Degree of protection | IP20 | Ambient temperature (operation) | -20 °C ... 50 °C |
Ambient temperature (storage/transport) | -20 °C ... 70 °C | Max. permissible relative humidity (operation) | 95 % |
Certificate | CE-compliant | Identification | Class I, Div. 2, Groups A, B, C, D T4 |
Identification | Class I, Zone 2, Ex ec IIC Gc T4 X | Identification | Class I, Zone 2, AEx ec IIC T4 |
Standards/regulations | EN IEC 60664-1 | Mounting type | Plug-in mounting |
Assembly note | can be plugged onto 8 x PLC-INTERFACE terminal blocks | Mounting position | any |
Specifications may be subject to change without notice