Product Model
RAD-2400-IFS-JP
Selling Points
- 1Reliable 2.4 GHz wireless communication with Trusted Wireless 2.0 technology.
- 2Supports RS-232 and RS-485 interfaces for versatile data transmission.
- 3Modular extension with up to 32 I/O extension modules for flexible network structures.
- 4Quick and easy setup without programming using the thumbwheel.
- 5High degree of reliability with 128-bit data encryption (AES) and frequency hopping method.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Note on application | Only for industrial use | CE note | The products are offered exclusively for export outside the EU and the European Economic Area. |
Product type | Wireless module | Application | I/O
RS-232
RS-485 |
Operating mode | I/O data (Default setting, configuration via thumbwheel)
Serial data (Activation and configuration via PSI-CONF software)
PLC/Modbus RTU mode (Activation and configuration via PSI-CONF software)
PLC / Modbus RTU dual mode (Activation and configuration via PSI-CONF software) | MTTF | 778 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
358 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
142 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) |
Article revision | 04 | Overvoltage category | II |
Degree of pollution | 2 | Maximum power dissipation for nominal condition | 1.56 W |
Transient surge protection | yes | Designation | Wireless module |
Number of supported devices | ≤ 250 (Addressing via PSI-CONF software)
≤ 99 (Addressing via thumbwheel) | Number of possible extension modules | ≤ 32 (per wireless module) |
Designation | Wireless network | Number of supported devices | ≤ 99 (I/O extension modules per wireless network, serial interfaces deactivated)
0 (no I/O extension modules can be used)
≤ 99 (I/O extension modules per wireless network, access to extension modules via Modbus RTU protocol) |
Supply voltage | 24 V DC | Supply voltage range | 19.2 V DC ... 30.5 V DC |
Max. current consumption | ≤ 65 mA (at 24 V DC, at 25 °C, stand-alone)
≤ 6 A (at 24 V DC, with DIN rail connector at full capacity) | Output name | RF link relay output |
Number of outputs | 1 | Contact switching type | Changeover contact |
Contact material | PdRu, gold-plated | Maximum switching voltage | 30 V AC/DC
60 V DC |
Max. switching current | 500 mA (30 V AC/DC)
300 mA (60 V DC) | Electrical service life | 5x 10 |
Output name | RSSI voltage output | Number of outputs | 1 |
Voltage output signal | 0 V ... 3 V | Connection method | Screw connection |
Stripping length | 7 mm | Conductor cross section, rigid min. | 0.2 mm² |
Conductor cross section, rigid max. | 2.5 mm² | Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² | Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 | Range | ≤ 5 km (The range may be considerably above or below that stated, and depends on the environment, antenna technology, and the product used) |
Data rate | 300 bps / 600 bps / 1.2 kbps / 2.4 kbps / 4.8 kbps / 9.6 kbps / 19.2 kbps / 38.4 kbps / 57.6 kbps / 93.75 kbps / 115.2 kbps | Connection method | COMBICON plug-in screw terminal block |
Connection technology | 3-conductor | Transmission length | ≤ 15 m |
Data rate | 300 bps / 600 bps / 1.2 kbps / 2.4 kbps / 4.8 kbps / 9.6 kbps / 19.2 kbps / 38.4 kbps / 57.6 kbps / 93.75 kbps / 115.2 kbps / 187.5 kbps | Connection method | COMBICON plug-in screw terminal block |
Connection technology | 2-conductor | Transmission length | ≤ 1200 m |
Termination resistor | 390 Ω (switchable via DIP switches)
150 Ω (switchable via DIP switches)
390 Ω (switchable via DIP switches) | Connection method | S-PORT (socket) |
Interface description | Trusted Wireless | Direction | Bi-directional |
Frequency | 2400 MHz | Frequency range | 2.4002 GHz ... 2.4785 GHz |
Channel distance | 1.3 MHz | Number of channel groups | 8 |
Number of channels per group | 55 | Transmit capacity, minimum | 0 dBm |
Transmit capacity, maximum | ≤ 20 dBm | Data rate | 16 kbps (adjustable)
125 kbps (Default setting, adjustable)
250 kbps (adjustable) |
Minimum receiver sensitivity | -106 dBm (16 kbps)
-96 dBm (125 kbps)
-93 dBm (250 kbps) | Antenna connection method | RSMA (female) |
Security | 128-bit data encryption | Wireless licenses | Japan |
Frequency band | 2.4 GHz | Wireless standard | Trusted Wireless |
Status display | LED supply voltage, PWR (green)
Green LED (bus communication, DAT)
LED periphery error, ERR (red)
3x green, 1x yellow LED (LED bar graph receive quality, RSSI)
Green LED (receive data, RX)
Green LED (transmit data, TX) | Width | 17.5 mm |
Height | 116 mm | Depth | 114.5 mm |
Color (Housing) | gray (RAL 7042) | Material (Housing) | PA 6.6-FR |
Flammability rating according to UL 94 | V0 | Degree of protection | IP20 |
Ambient temperature (operation) | -40 °C ... 70 °C (>55°C derating, see technical documentation)
-40 °F ... 158 °F (>131°F derating, see technical documentation) | Ambient temperature (storage/transport) | -40 °C ... 85 °C
-40 °F ... 185 °F |
Altitude | 2000 m | Permissible humidity (operation) | 20 % ... 85 % |
Permissible humidity (storage/transport) | 20 % ... 85 % | Shock | 16g, 11 ms |
Vibration (operation) | in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz | Identification | Japan MIC (RF) ID:202-LSE100 |
Identification | ISA-S71.04-1985 G3 Harsh Group A | Electromagnetic compatibility | Conformance with RED Directive 2014/53/EU |
Mounting type | DIN rail mounting | Assembly note | on standard DIN rail NS 35 in accordance with EN 60715 |
Specifications may be subject to change without notice