Phoenix Contact RAD-900-IFS

Selling Points

  • 1Supports I/O data, serial data, and PLC/Modbus RTU mode.
  • 2128-bit AES encryption for secure data transmission.
  • 3Quick and easy startup with simple wireless module addressing using the thumbwheel.
  • 4Can be extended with up to 32 I/O modules per station via DIN rail connector.
  • 5Supports point-to-point, star, and mesh networks up to 250 stations.
Product Details
RAD-900-IFS
Phoenix Contact

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

ParameterValueParameterValue
CE note
The products are offered exclusively for export outside the EU and the European Economic Area.
Product type
Wireless module
Operating mode
PLC / Modbus RTU dual mode (Activation and configuration via PSI-CONF software)
MTTF
20.4 Years
Article revision
11
Overvoltage category
II
Degree of pollution
2
Transient surge protection
yes
Supply voltage
24 V DC
Supply voltage range
10.8 V DC ... 30.5 V DC
Max. current consumption
328 mA (@24 V DC)
Power consumption
8.4 W (peak; 30 dBm)
Output name
RF link relay output
Number of outputs
1
Contact switching type
Changeover contact
Contact material
PdRu, gold-plated
Maximum switching voltage
30 V AC/DC
Max. switching current
500 mA
Electrical service life
5x 10
Output name
RSSI voltage output
Number of outputs
1
Voltage output signal
0 V ... 3 V
Connection method
Screw connection
Stripping length
7 mm
Conductor cross section, rigid min.
0.2 mm²
Conductor cross section, rigid max.
2.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
14
Range
≤ 32 km (The range may be considerably above or below that stated, and depends on the environment, antenna technology, and the product used)
Data rate
300 bps / 600 bps / 1.2 kbps / 2.4 kbps / 4.8 kbps / 9.6 kbps / 19.2 kbps / 38.4 kbps / 57.6 kbps / 93.75 kbps / 115.2 kbps
Connection method
COMBICON plug-in screw terminal block D-SUB-9 female connector
Connection technology
3-conductor
Data rate
300 bps / 600 bps / 1.2 kbps / 2.4 kbps / 4.8 kbps / 9.6 kbps / 19.2 kbps / 38.4 kbps / 57.6 kbps / 93.75 kbps / 115.2 kbps / 187.5 kbps
Connection method
COMBICON plug-in screw terminal block
Connection technology
2-conductor
Termination resistor
390 Ω (switchable via DIP switches) 150 Ω (switchable via DIP switches) 390 Ω (switchable via DIP switches)
Connection method
S-PORT (socket)
Interface description
Trusted Wireless
Direction
Bi-directional
Frequency
900 MHz
Frequency range
902 MHz ... 928 MHz
Transmission power
max. 1 W (adjustable)
Data rate
16 kbps (adjustable) 125 kbps (adjustable) 250 kbps (adjustable) 500 kbps (adjustable)
Minimum receiver sensitivity
-112 dBm (16 kbps) -105 dBm (125 kbps) -102 dBm (250 kbps) -95 dBm (500 kbps)
Antenna connection method
RSMA (female)
Security
128-bit data encryption
Wireless licenses
Americas, more countries in E-shop
Country support
USA (FCC, Part 15.247, ID: SGV-SHR-900) Canada (IC, RSS210, ID: 4720C-SHR900) Mexico (IFT, ID: RCPPHRA17-1113) Chile Argentina
Frequency band
900 MHz
Wireless standard
Trusted Wireless
Status display
LED supply voltage, PWR (green) Green LED (bus communication, DAT) LED periphery error, ERR (red) 3x green, 1x yellow LED (LED bar graph receive quality, RSSI) Green LED (receive data, RX) Green LED (transmit data, TX)
Width
35 mm
Height
116 mm
Depth
114.5 mm
Color
green
Flammability rating according to UL 94
V0
Housing material
PA 6.6-FR
Degree of protection
IP20
Ambient temperature (operation)
-40 °C ... 70 °C -40 °F ... 158 °F
Ambient temperature (storage/transport)
-40 °C ... 85 °C -40 °F ... 185 °F
Altitude
2000 m
Permissible humidity (operation)
20 % ... 85 %
Permissible humidity (storage/transport)
20 % ... 85 %
Shock
16g, 11 ms
Vibration (operation)
in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz
Conformance
FCC Directive, Part 15.247 ISC Directive RSS 210
UL, USA
Class I, Zone 2, AEx nA nC IIC T4
UL, USA / Canada
Class I, Div. 2, Groups A, B, C, D
UL, Canada
Class I, Zone 2, Ex nA nC nL IIC T4 Gc X
CSA
CSA C22.2
Electromagnetic compatibility
Conformance with EMC Directive 2004/108/EC
Standard designation
NOM
Note
IFT RCPPHRA17-1113
Mounting type
DIN rail mounting
Assembly note
on standard DIN rail NS 35 in accordance with EN 60715

Specifications may be subject to change without notice