BMXDDM16022H Discrete I/O Module by Schneider Electric

Selling Points

1High Reliability: MTBF reliability of 427,772 hours ensures consistent performance.
2Severe Environment Capable: Designed for harsh conditions with IP20 protection and 0-60°C operating temperature.
3Versatile Connectivity: Compatible with 2-wire/3-wire proximity sensors and IEC 60947-5-2 standards.
4Advanced Protection: Equipped with overvoltage, reverse polarity, and short-circuit protections.
5Efficient Power Management: Consumes 3.7 W typical power and has a maximum current per module of 5 A.

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

Parameter	Value	Parameter	Value
Range of Product	Modicon X80	Product or Component Type	Discrete I/O module
Product Specific Application	For severe environments	Discrete input number	8
input type	Current sink (logic positive)	Discrete input voltage	24 V DC positive
Discrete input current	3.5 mA	Discrete output number	8
Discrete output type	Solid state	Discrete output voltage	24 V 19...30 V DC 140 °F (60 °C)<br />24 V 26.4 V DC 158 °F (70 °C)
Discrete output current	0.5 A	Input compatibility	With 2-wire/3-wire proximity sensors IEC 60947-5-2<br />With 2-wire/3-wire proximity sensors IEC 61131-2 type 3
Sensor power supply	21.1...29.0 V 158 °F (70 °C)<br />19...30 V 140 °F (60 °C)	Current state 1 guaranteed	>= 3 mA
Current state 0 guaranteed	<= 1.5 mA	Current per channel	0.55 A 158 °F (70 °C)<br />0.625 A 140 °F (60 °C)
Maximum current per module	5 A 140 °F (60 °C)<br />4.4 A 158 °F (70 °C)	Maximum leakage current	0.5 mA at state 0
Maximum voltage drop	<1.2 V at state 1	input impedance	6800 Ohm
Insulation resistance	> 10 MOhm 500 V DC	Power dissipation in W	3.7 W
DC typical response time	4 ms	DC maximum response time	7 ms
Response time on output	1.2 ms	Paralleling of outputs	Yes : 2 maximum
Typical current consumption	79 mA 3.3 V DC<br />59 mA 24 V DC	Current consumption	<= 111 mA 3.3 V DC<br /><= 67 mA 24 V DC
MTBF reliability	450000 H	Protection type	1 external fuse per group of input channel 0.5 A fast blow<br /> overvoltage protection on output<br /> reverse polarity protection on input<br /> reverse polarity protection on output
Output overload protection	With electronic circuit breaker 1.5 In < Id < 2 In<br />With current limiter	Output overvoltage protection	With transil diode
Output short-circuit protection	With 2 A external fuse	Reverse polarity protection	Reverse mounted diode
Voltage detection threshold	< 14 V DC preactuator fault<br />< 14 V DC sensor fault<br />> 18 V DC preactuator OK<br />> 18 V DC sensor OK	Maximum tungsten load	6 W
Switching frequency	0.5/LI² Hz	Maximum overload time	15 ms
Load impedance ohmic	>= 48 Ohm	Status LED	1 LED (Green) module operating (RUN)<br />1 LED per channel (Green) channel diagnostic<br />1 LED (Red) module error (ERR)<br />1 LED (Red) module I/O
Net Weight	0.254 lb(US) (0.115 kg)	IP Degree of Protection	IP20
Directives	2014/35/EU - low voltage directive<br />2014/30/EU - electromagnetic compatibility	Environmental characteristic	Gas resistant class Gx<br />Gas resistant class 3C4<br />Dust resistant class 3S4<br />Sand resistant class 3S4<br />Salt resistant level 2<br />Mold growth resistant class 3B2<br />Fungal spore resistant class 3B2
Dielectric strength	1500 V AC 50/60 Hz 1 minute, output/ground<br />1500 V AC 50/60 Hz 1 minute, output/internal logic<br />1500 V AC 50/60 Hz 1 minute, primary/secondary<br />500 V DC 1 minute, between group of inputs and outputs	Vibration resistance	3 gn
Shock resistance	30 gn	Ambient Air Temperature for Storage	-40…185 °F (-40…85 °C)
Ambient Air Temperature for Operation	-13…158 °F (-25…70 °C)	Relative humidity	5…95 % 131 °F (55 °C) without condensation
Protective treatment	Conformal coating	Operating altitude	0...6561.68 ft (0...2000 m)<br />2000...5000 m with derating factor

Specifications may be subject to change without notice