Product Model
TM5C12D8T
Selling Points
- 1Flexible and scalable configuration for remote or distributed IO islands.
- 212 discrete inputs with sink logic and 8 discrete transistor outputs with source logic.
- 3Compatible with Modicon LMC058 motion controller and Modicon M258 logic controller.
- 4IP20 rated, made of white plastic, and weighs 0.37kg.
- 5Certified by GOST-R, C-Tick, cULus, and CSA, meeting IEC 61131-2 and UL 508 standards.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Range of Product | Modicon TM5 | Product or Component Type | Compact I/O expansion block |
Enclosure Material | Plastic | Color | White |
Input/output number | 20 | for enclosure nominal dimensions | 12 I + 8 O |
Number of modules | Digital input 3 x 4<br />Digital output 2 x 4 | Discrete input number | 12 |
Discrete input voltage | 24 V | Discrete input voltage type | DC |
input voltage limits | 20.4...28.8 V | Discrete input logic | Sink |
Discrete input current | 3.75 mA | input impedance | 6.4 kOhm |
Analogue input number | 0 | Discrete output number | 8 |
Discrete output type | Transistor | Wiring mode | 3-wire discrete input<br />3-wire discrete output |
Output voltage | 24 V DC | Output voltage limits | 20.4...28.8 V DC |
Discrete output logic | Source | Discrete output current | 0.5 A per output |
Peak output current | 4 A | Voltage state 0 guaranteed | <= 5 V |
Voltage state 1 guaranteed | >= 15 V | Input filtering | <= 100 ms hardware<br /><= 25 ms configurable by software |
Response time | <= 300 µs from state 0 to state 1 output<br /><= 300 µs from state 1 to state 0 output | Maximum leakage current | 5 µA when switched off) output |
Isolation | 500 Vrms AC insulation between channel and bus<br />No insulation between channels | Maximum voltage drop | <0.3 V at 500 mA output |
Current consumption | 68 mA 5 V DC bus<br />80 mA 24 V DC input/output | Max current | 1000 mA sensor supply<br />1500 mA actuator supply<br />4000 mA loads on I/O power segment |
Maximum power dissipation in W | 2.36 W | Local signalling | for power supply 5 LEDs (green)<br /> for power supply 5 LEDs (red)<br /> for input status 12 LEDs (green)<br /> for output status 8 LEDs (yellow) |
Sensor power supply | 24 V, 500 mA for all channels overload, short-circuit and reverse polarity protection | Electrical Connection | Removable spring terminal block |
marking | CE | Surge withstand | 0.5 kV differential mode 24 V DC IEC 61000-4-5<br />1 kV common mode 24 V DC IEC 61000-4-5 |
Electromagnetic compatibility | EN/IEC 61000-4-6 | Disturbance radiated/conducted | CISPR 11 |
Standards | IEC 61131-2<br />UL 508<br />CSA C22.2 No 213<br />CSA C22.2 No 142 | Product Certifications | C-tick<br />GOST-R<br />CSA<br />cULus |
Ambient air temperature for operation | 14…122 °F (-10…50 °C) vertical installation)<br />14…140 °F (-10…60 °C) horizontal installation) | Ambient Air Temperature for Storage | -40…158 °F (-40…70 °C) |
Relative Humidity | 5…95 % without condensation | IP degree of protection | IP20IEC 61131-2 |
Pollution degree | 2 IEC 60664 | Operating altitude | 0...6561.68 ft (0...2000 m) |
Storage altitude | 0.0000000000…9842.5 ft (0…3000 m) | Vibration resistance | 1 gn 8.4…150 Hz DIN rail<br />3.5 mm 5…8.4 Hz DIN rail |
Shock resistance | 15 gn 11 ms | Resistance to electrostatic discharge | 4 kV on contact IEC 61000-4-2<br />8 kV in air IEC 61000-4-2 |
Resistance to electromagnetic fields | 0.9 V/m (1 V/m) 2...2.7 GHz IEC 61000-4-3<br />9.1 V/m (10 V/m) 80...2000 MHz IEC 61000-4-3 | Resistance to fast transients | 1 kV IEC 61000-4-4 I/O)<br />1 kV IEC 61000-4-4 shielded cable)<br />2 kV IEC 61000-4-4 power lines) |
Mounting Support | DIN rail | Net Weight | 0.53 lb(US) (0.24 kg) |
Specifications may be subject to change without notice