Product Model
TM5SDM12DT
Selling Points
- 1Flexible I/O Configuration: Easily configure your I/O setup to meet specific needs.
- 2Embedded Diagnostics: Monitor and supervise your I/O modules locally and remotely.
- 3Hot Swapping: Swap I/O modules without interrupting the system.
- 4Cabling Simplicity: Use spring terminals and removable terminal blocks for easy cabling.
- 5Environmental Compliance: Meets stringent environmental standards, including RoHS and WEEE compliance.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Range of Product | Modicon TM5 | Product or Component Type | Discrete I/O module |
Discrete input number | 8 | Discrete input voltage | 24 V |
Discrete output number | 4 | Discrete output type | Transistor |
Range Compatibility | Modicon M258<br />Modicon LMC058<br />PacDrive LMC motion controller | Product Compatibility | PacDrive LMC Pro 2<br />Motion controller<br />PacDrive LMC Pro<br />PacDrive LMC Eco<br />Logic controller |
Discrete input voltage type | DC | Input voltage limits | 20.4...28.8 V |
Discrete input logic | Sink | Discrete input current | 3.75 mA |
input impedance | 6.4 kOhm | Output voltage | 24 V DC |
Output voltage limits | 20.4...28.8 V | Discrete output logic | Source |
Current per channel | 0.5 A | Maximum current per output common | 2 A |
Color | White | Peak output current | 12 A |
Switching frequency | <= 500 Hz resistive | Voltage state 0 guaranteed | <= 5 V |
Voltage state 1 guaranteed | >= 15 V | Input filtering | <= 25 ms configurable by software<br /><= 100 ms hardware |
Response time | <= 300 µs from state 0 to state 1 output<br /><= 300 µs from state 1 to state 0 output | Maximum leakage current | 5 µA when switched off |
Protection Type | Reverse polarity protection<br />Short-circuit protection<br />Overload protection | Isolation | No insulation between channels<br />500 Vrms AC insulation between channel and bus |
Maximum voltage drop | <0.3 V at 500 mA output | Current consumption | 42 mA 5 V DC bus<br />21 mA 24 V DC all inputs On |
Maximum power dissipation in W | 1.52 W | Local signalling | 1 LED green power supply<br />1 LED red power supply<br />4 LEDs yellow output status<br />8 LEDs green input status |
Electrical connection | 1 wire | Marking | CE |
Net Weight | 0.055 lb(US) (0.025 kg) | Standards | CSA C22.2 No 142<br />UL 508<br />CSA C22.2 No 213<br />IEC 61131-2 |
Product Certifications | GOST-R<br />cULus<br />C-tick<br />CSA | Ambient air temperature for operation | 14…131 °F (-10…55 °C) without derating horizontal installation)<br />14…140 °F (-10…60 °C) with derating factor horizontal installation)<br />14…122 °F (-10…50 °C) vertical installation) |
Ambient Air Temperature for Storage | -40…158 °F (-40…70 °C) | Relative Humidity | 5…95 % without condensation |
IP degree of protection | IP20IEC 61131-2 | Pollution degree | 2 IEC 60664 |
Operating altitude | 0...6561.68 ft (0...2000 m) | Storage altitude | 0.0000000000…9842.5 ft (0…3000 m) |
Vibration resistance | 1 gn 8.4…150 Hz DIN rail<br />3.5 mm 5…8.4 Hz DIN rail | Shock resistance | 15 gn 11 ms |
Electromagnetic compatibility | Electrostatic discharge immunity test, 4 kV on contact IEC 61000-4-2<br />Electrostatic discharge immunity test, 8 kV in air IEC 61000-4-2<br />Susceptibility to electromagnetic fields, 1 V/m 2...2.7 GHz IEC 61000-4-3<br />Susceptibility to electromagnetic fields, 10 V/m 80...2000 MHz IEC 61000-4-3<br />Electrical fast transient/burst immunity test, 1 kV I/O IEC 61000-4-4<br />Electrical fast transient/burst immunity test, 1 kV shielded cable IEC 61000-4-4<br />Electrical fast transient/burst immunity test, 2 kV power lines IEC 61000-4-4<br />1.2/50 µs shock waves immunity test, 0.5 kV differential mode IEC 61000-4-5<br />1.2/50 µs shock waves immunity test, 1 kV common mode IEC 61000-4-5<br />Conducted RF disturbances IEC 61000-4-6<br />Conducted and radiated emissions CISPR 11 |
Specifications may be subject to change without notice