schneider TM5SDO12T

Selling Points

  • 1High-performance and safe IP20 modular I/O system.
  • 2Provides 12 transistor outputs with source (negative) logic.
  • 3Compatible with Modicon LMC058 motion controller and Modicon M258 logic controller.
  • 4Insulation between channel and bus at 500Vrms AC, no insulation between channels.
  • 5Certified by GOST-R, C-Tick, cULus, and CSA for global compliance.
Product Details
TM5SDO12T
schneider

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

ParameterValueParameterValue
Range of Product
Modicon TM5
Product or Component Type
Discrete output module
Discrete output number
12
Discrete output type
Transistor
Range Compatibility
PacDrive LMC motion controller<br />Modicon LMC058<br />Modicon M258
Product Compatibility
PacDrive LMC Eco<br />PacDrive LMC Pro 2<br />PacDrive LMC Pro<br />Motion controller<br />Logic controller
Output voltage
24 V DC
Output voltage limits
20.4...28.8 V
Discrete output logic
Source
Current per channel
0.5 A
Maximum current per output common
6 A
Color
White
Peak output current
12 A
Switching frequency
<= 500 Hz resistive
Response time
<= 300 µs from state 0 to state 1 output<br /><= 300 µs from state 1 to state 0 output
Maximum leakage current
5 µA when switched off
Protection Type
Reverse polarity protection<br />Overload protection<br />Short-circuit protection
Isolation
500 Vrms AC insulation between channel and bus<br />No insulation between channels
Maximum voltage drop
<0.3 V at 500 mA output<br /> <2 V at 500 mA sensor supply
Maximum supply current for sensors
500 mA
Current consumption
52 mA 5 V DC bus<br />48 mA 24 V DC input/output
Maximum power dissipation in W
2.04 W
Local signalling
1 LED green power supply<br />1 LED red power supply<br />12 LEDs yellow output status
Electrical connection
1 wire
Marking
CE
Net Weight
0.055 lb(US) (0.025 kg)
Standards
CSA C22.2 No 213<br />UL 508<br />CSA C22.2 No 142<br />IEC 61131-2
Product Certifications
GOST-R<br />CSA<br />cULus<br />C-tick
Ambient air temperature for operation
14…131 °F (-10…55 °C) without derating horizontal installation)<br />14…140 °F (-10…60 °C) with derating factor horizontal installation)<br />14…122 °F (-10…50 °C) vertical installation)
Ambient Air Temperature for Storage
-40…158 °F (-40…70 °C)
Relative Humidity
5…95 % without condensation
IP degree of protection
IP20IEC 61131-2
Pollution degree
2 IEC 60664
Operating altitude
0...6561.68 ft (0...2000 m)
Storage altitude
0.0000000000…9842.5 ft (0…3000 m)
Vibration resistance
1 gn 8.4…150 Hz DIN rail<br />3.5 mm 5…8.4 Hz DIN rail
Shock resistance
15 gn 11 ms
Electromagnetic compatibility
Electrostatic discharge immunity test, 4 kV on contact IEC 61000-4-2<br />Electrostatic discharge immunity test, 8 kV in air IEC 61000-4-2<br />Susceptibility to electromagnetic fields, 1 V/m 2...2.7 GHz IEC 61000-4-3<br />Susceptibility to electromagnetic fields, 10 V/m 80...2000 MHz IEC 61000-4-3<br />Electrical fast transient/burst immunity test, 1 kV I/O IEC 61000-4-4<br />Electrical fast transient/burst immunity test, 1 kV shielded cable IEC 61000-4-4<br />Electrical fast transient/burst immunity test, 2 kV power lines IEC 61000-4-4<br />1.2/50 µs shock waves immunity test, 0.5 kV differential mode IEC 61000-4-5<br />1.2/50 µs shock waves immunity test, 1 kV common mode IEC 61000-4-5<br />Conducted RF disturbances IEC 61000-4-6<br />Conducted and radiated emissions CISPR 11

Specifications may be subject to change without notice