Product Model
TM5SDO4T
Selling Points
- 1Flexible and Scalable I/O Configuration - Easily integrate into complex machines with remote or distributed IO islands.
- 2Embedded Diagnostics - Local and distant supervision capabilities for enhanced monitoring.
- 3Hot Swapping of I/O Modules - Simplify maintenance with the ability to swap modules without shutting down the system.
- 4Cabling Simplicity - Use spring terminals or removable terminal blocks for easy cabling setup.
- 5Comprehensive Safety Features - Includes reverse polarity protection, short circuit protection, and overload protection for reliable operation.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Range of Product | Modicon TM5 | Product or Component Type | Discrete output module |
Discrete output number | 4 | Discrete output type | Transistor |
Range Compatibility | Modicon LMC058<br />PacDrive LMC motion controller<br />Modicon M258 | Product Compatibility | PacDrive LMC Pro 2<br />PacDrive LMC Pro<br />PacDrive LMC Eco<br />Logic controller<br />Motion controller |
Output voltage | 24 V DC | Output voltage limits | 20.4...28.8 V |
Discrete output logic | Source | Current per channel | 0.5 A |
Maximum current per output common | 2 A | Color | White |
Peak output current | 12 A | Switching frequency | <= 500 Hz resistive |
Response time | <= 300 µs from state 0 to state 1 output<br /><= 300 µs from state 1 to state 0 output | Maximum leakage current | 5 µA when switched off |
Protection Type | Reverse polarity protection<br />Short-circuit protection<br />Overload protection | Isolation | 500 Vrms AC insulation between channel and bus<br />No insulation between channels |
Maximum voltage drop | <0.3 V at 500 mA output<br /> <2 V at 500 mA sensor supply | Maximum supply current for sensors | 500 mA |
Current consumption | 20 mA 24 V DC input/output<br />32 mA 5 V DC bus | Maximum power dissipation in W | 0.86 W |
Local signalling | 1 LED green power supply<br />1 LED red power supply<br />4 LEDs yellow output status | Electrical connection | 3 wires |
marking | CE | Net Weight | 0.055 lb(US) (0.025 kg) |
Standards | IEC 61131-2<br />CSA C22.2 No 213<br />UL 508<br />CSA C22.2 No 142 | Product Certifications | CSA<br />GOST-R<br />cULus<br />C-tick |
Ambient air temperature for operation | 14…131 °F (-10…55 °C) without derating horizontal installation)<br />14…140 °F (-10…60 °C) with derating factor horizontal installation)<br />14…122 °F (-10…50 °C) vertical installation) | Ambient Air Temperature for Storage | -40…158 °F (-40…70 °C) |
Relative Humidity | 5…95 % without condensation | IP degree of protection | IP20IEC 61131-2 |
Pollution degree | 2 IEC 60664 | Operating altitude | 0...6561.68 ft (0...2000 m) |
Storage altitude | 0.0000000000…9842.5 ft (0…3000 m) | Vibration resistance | 1 gn 8.4…150 Hz DIN rail<br />3.5 mm 5…8.4 Hz DIN rail |
Shock resistance | 15 gn 11 ms | Electromagnetic compatibility | Electrostatic discharge immunity test, 4 kV on contact IEC 61000-4-2<br />Electrostatic discharge immunity test, 8 kV in air IEC 61000-4-2<br />Susceptibility to electromagnetic fields, 1 V/m 2...2.7 GHz IEC 61000-4-3<br />Susceptibility to electromagnetic fields, 10 V/m 80...2000 MHz IEC 61000-4-3<br />Electrical fast transient/burst immunity test, 1 kV I/O IEC 61000-4-4<br />Electrical fast transient/burst immunity test, 1 kV shielded cable IEC 61000-4-4<br />Electrical fast transient/burst immunity test, 2 kV power lines IEC 61000-4-4<br />1.2/50 µs shock waves immunity test, 0.5 kV differential mode IEC 61000-4-5<br />1.2/50 µs shock waves immunity test, 1 kV common mode IEC 61000-4-5<br />Conducted RF disturbances IEC 61000-4-6<br />Conducted and radiated emissions CISPR 11 |
Specifications may be subject to change without notice