INDCTL Logo
schneiderPLC/PAC and Controllers
Product Model

TM5SDO8TA

Manufacturer

schneider

Category

PLC/PAC and Controllers

Product ID

34066

In Stock
Last updated: 2025/4/23
View Specifications
schneider TM5SDO8TA

Selling Points

  • 1Flexible and Scalable I/O Configuration: Easily configure and optimize your machines with a flexible I/O system.
  • 2Embedded Diagnostics: Enjoy local and distant supervision with embedded diagnostics for enhanced reliability.
  • 3Hot Swapping Capability: Hot swap I/O modules without disrupting your system, ensuring minimal downtime.
  • 4Cabling Simplicity: Use spring terminals and removable terminal blocks for easy cabling, reducing engineering time.
  • 5High-Performance and Safe Design: Meets IP20 standards and is certified by GOST-R, C-Tick, cULus, and CSA for safe and reliable operation.
Product Details
TM5SDO8TA
schneider

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

ParameterValueParameterValue
Range of Product
Modicon TM5
Product or Component Type
Discrete output module
Discrete output number
8
Discrete output type
Transistor
Range Compatibility
Modicon M258<br />PacDrive LMC motion controller<br />Modicon LMC058
Product Compatibility
Motion controller<br />PacDrive LMC Pro<br />PacDrive LMC Pro 2<br />Logic controller<br />PacDrive LMC Eco
Output voltage
24 V DC
Output voltage limits
20.4...28.8 V
Discrete output logic
Source
Current per channel
2 A
Maximum current per output common
8 A
Color
White
Peak output current
12 A
Switching frequency
<= 500 Hz resistive
Response time
<= 300 µs from state 0 to state 1 output<br /><= 300 µs from state 1 to state 0 output
Maximum leakage current
5 µA when switched off
Protection Type
Short-circuit protection<br />Reverse polarity protection<br />Overload protection
Isolation
No insulation between channels<br />500 Vrms AC insulation between channel and bus
Current consumption
0 mA 24 V DC input/output<br />44 mA 5 V DC bus
Maximum power dissipation in W
1.5 W
Local signalling
1 LED green power supply<br />1 LED red power supply<br />8 LEDs yellow output status
Electrical connection
1 wire
marking
CE
Net Weight
0.055 lb(US) (0.025 kg)
Standards
IEC 61131-2<br />CSA C22.2 No 142<br />CSA C22.2 No 213<br />UL 508
Product Certifications
cULus<br />CSA<br />C-tick<br />GOST-R
Ambient air temperature for operation
14…131 °F (-10…55 °C) without derating horizontal installation)<br />14…140 °F (-10…60 °C) with derating factor horizontal installation)<br />14…122 °F (-10…50 °C) vertical installation)
Ambient Air Temperature for Storage
-40…158 °F (-40…70 °C)
Relative Humidity
5…95 % without condensation
IP degree of protection
IP20IEC 61131-2
Pollution degree
2 IEC 60664
Operating altitude
0...6561.68 ft (0...2000 m)
Storage altitude
0.0000000000…9842.5 ft (0…3000 m)
Vibration resistance
1 gn 8.4…150 Hz DIN rail<br />3.5 mm 5…8.4 Hz DIN rail
Shock resistance
15 gn 11 ms
Electromagnetic compatibility
Electrostatic discharge immunity test, 4 kV on contact IEC 61000-4-2<br />Electrostatic discharge immunity test, 8 kV in air IEC 61000-4-2<br />Susceptibility to electromagnetic fields, 1 V/m 2...2.7 GHz IEC 61000-4-3<br />Susceptibility to electromagnetic fields, 10 V/m 80...2000 MHz IEC 61000-4-3<br />Electrical fast transient/burst immunity test, 1 kV I/O IEC 61000-4-4<br />Electrical fast transient/burst immunity test, 1 kV shielded cable IEC 61000-4-4<br />Electrical fast transient/burst immunity test, 2 kV power lines IEC 61000-4-4<br />1.2/50 µs shock waves immunity test, 0.5 kV differential mode IEC 61000-4-5<br />1.2/50 µs shock waves immunity test, 1 kV common mode IEC 61000-4-5<br />Conducted RF disturbances IEC 61000-4-6<br />Conducted and radiated emissions CISPR 11

Specifications may be subject to change without notice