Product Model
TSXCTY2CC
Selling Points
- 1High-frequency counting up to 1 MHz.
- 2Robust I/O capabilities with 2 channels.
- 3Compatible with 24VDC and 5VDC power supplies.
- 4Thermal tripping protection for reliable operation.
- 52-year warranty for added peace of mind.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Range of Product | Modicon Premium Automation platform | Product or Component Type | Measurement and counter module |
I/O modularity | 2 channels | Electrical circuit type | Auxiliary output |
Counting frequency | 1000000 Hz | Incremental encoder frequency x1 | 500 kHz |
Incremental encoder frequency x 4 | 250 kHz | Power dissipation in W | 7…10 W |
Cycle time | 1 ms | Discrete input logic | Current sink auxiliary input (preset, enable and read) IEC 1131 Type 2<br />Resistive 2/3-wire proximity sensors PNP/NPN IEC 1131 Type 2<br />Resistive encoder input |
Input logic | Positive | Input compatibility | Absolute encoder parallel output ABE7CPA11<br />Incremental encoder 10...30 V totem pole<br />Incremental encoder 5 V DC RS422<br />Absolute encoder SSI serial output |
Input voltage | 24 V 16 mA 2/3-wire proximity sensors PNP/NPN<br />24 V 8 mA auxiliary input (preset, enable and read)<br />5 V 18 mA encoder input | Input voltage limits | <= 5.5 V encoder input<br />19...30 V 2/3-wire proximity sensors PNP/NPN<br />19...30 V auxiliary input (preset, enable and read) |
Voltage state 1 guaranteed | >= 11 V 2/3-wire proximity sensors PNP/NPN<br />>= 11 V auxiliary input (preset, enable and read)<br />>= 2.4 V encoder input | Current state 1 guaranteed | >= 6 mA 2/3-wire proximity sensors PNP/NPN)<br />>= 6 mA auxiliary input (preset, enable and read))<br />>= 3.6 mA encoder input) |
Voltage state 0 guaranteed | <= 1.2 V encoder input<br /><= 5 V 2/3-wire proximity sensors PNP/NPN<br /><= 5 V auxiliary input (preset, enable and read) | Current state 0 guaranteed | <= 1 mA encoder input)<br /><= 2 mA 2/3-wire proximity sensors PNP/NPN)<br /><= 2 mA auxiliary input (preset, enable and read)) |
Response time | < 10 ms sensor voltage at return of 24 V auxiliary input (preset, enable and read)<br />< 2.5 ms sensor voltage at loss of 24 V auxiliary input (preset, enable and read) | Input impedance | Encoder input > 270 Ohm at U = 2.4 V<br />2/3-wire proximity sensors PNP/NPN 1500 Ohm at Un<br />Auxiliary input (preset, enable and read) 3400 Ohm at Un<br />Encoder input 400 Ohm at Un |
Output voltage | 24 V DC | Nominal output current | 0.5 A |
Output voltage limits | 19...30 V | Maximum voltage drop | <0.5 V at state 1 |
Output compatibility | Positive logic DC inputs (resistance <= 15 kOhm) auxiliary output | Maximum leakage current | 0.1 mA |
Switching time | < 0.250 ms | Switching frequency | < 0.6/LI² Hz on inductive load |
Output overload protection | Thermal tripping via program or automatically<br />Current limiter | Output short-circuit protection | Thermal tripping via program or automatically<br />Current limiter |
Output overvoltage protection | Zener diode | Reverse polarity protection | Reverse diode on supply |
Checks | Sensor power supply | Current consumption | 15 mA 24 V DC<br />850 mA 5 V DC |
Module format | Standard | Local signalling | for module operating (RUN) 1 LED (green)<br /> for external fault (I/O) 1 LED (red)<br /> for internal fault, module failure (ERR) 1 LED (red)<br /> for axis diagnostics available (CH.) 2 LEDs (green) |
Electrical connection | 1 connector HE-10, 20 pins<br />2 connectors SUB-D 15 | Net Weight | 0.75 lb(US) (0.34 kg) |
Protective treatment | TC<br />Conformal coating Humiseal 1A33 | Ambient Air Temperature for Operation | 32…140 °F (0…60 °C) |
Ambient Air Temperature for Storage | -13…158 °F (-25…70 °C) | Relative Humidity | 5…95 % without condensation |
Operating altitude | <= 6561.68 ft (2000 m) |
Specifications may be subject to change without notice