Product Model
GSE20G-24112170ZZZ
Selling Points
- 1Compact design for space-saving installations.
- 2High precision detection with adjustable sensitivity.
- 3Robust mechanical and electrical options for DC power.
- 4Additional LED illumination for easier setup and monitoring.
- 5Configurable settings for customizable performance.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Functional principle | Through-beam photoelectric sensor | Sensing range_Sensing range min. | 0 m |
Sensing range_Sensing range max. | 120 m | Sensing range_Maximum distance range from receiver to sender (operating reserve 1) | 0 m ... 120 m |
Sensing range_Recommended distance range from receiver to sender (operating reserve 2) | 0 m ... 85 m | Emitted beam_Light source | LED |
Emitted beam_Type of light | Visible red light | Emitted beam_Shape of light spot | Rectangular |
Emitted beam_Light spot size (distance) | Ø 800 mm (20,000 mm) | Emitted beam_Maximum dispersion of the emitted beam around the standardized transmission axis (squint angle) | < +/- 1.5° (at Ta = +23 °C) |
Key LED figures_Normative reference | EN 62471:2008-09 | IEC 62471:2006, modified | Key LED figures_LED risk group marking | Free group |
Key LED figures_Wave length | 630 nm | Key LED figures_Average service life | 100,000 h at Ta= +25 °C |
Adjustment_Potentiometer | For sensitivity adjustment, 270° | Indication_LED green | Operating indicatorStatic on: power onStatic off: object present |
Indication_LED yellow | Status of received light beamStatic on: object not presentStatic off: object present | Supply voltage UB | 10 V DC ... 30 V DC |
Ripple | < 5 V | Usage category | DC-13 (according to EN 60947-1) |
Current consumption | ≤ 30 mA, without load. At U#!#= 24 V | Protection class | III |
Digital output_Number | 2 (Complementary) | Digital output_Type | Push-pull: PNP/NPN |
Digital output_Switching mode | Light/dark switching | Digital output_Signal voltage PNP HIGH/LOW | VS- (≤ 3 V) / approx. 0 V |
Digital output_Signal voltage NPN HIGH/LOW | VS- (≤ 3 V) / approx. 0 V | Digital output_Output current Imax. | ≤ 100 mA2) |
Digital output_Circuit protection outputs | Reverse polarity protected | Digital output | Overcurrent protected |
Digital output | Short-circuit protected | Digital output_Response time | ≤ 500 µs |
Digital output_Switching frequency | 1,000 Hz3) | Pin/Wire assignment, sender_BN 1 | + (L+) |
Pin/Wire assignment, sender_WH 2 | - | Pin/Wire assignment, sender_BU 3 | - (M) |
Pin/Wire assignment, sender_BK 4 | Test -> MInput, sender off, LOW active | Pin/Wire assignment, receiver_BN 1 | + (L+) |
Pin/Wire assignment, receiver_WH 2 | ǬDigital output, dark switching, object present → output Ǭ HIGHThe pin 2 function of the sensor can be switched | Pin/Wire assignment, receiver_BU 3 | - (M) |
Pin/Wire assignment, receiver_BK 4 | QDigital output, light switching, object present → output Q LOWThe pin 4 function of the sensor can be switched | Housing | Rectangular |
Dimensions (W x H x D) | 23.5 mm x 74.5 mm x 52.5 mm | Connection | Male connector M12, 4-pin |
Material_Housing | Plastic, ABS | Material_Front screen | Plastic, PMMA |
Weight | Approx. 105 g |
Specifications may be subject to change without notice