Product Model
KTM-WP117A1P
Selling Points
- 1High grayscale resolution for precise contrast detection.
- 2Reliable detection on glossy materials with a large dynamic range.
- 3IO-Link interface for easy integration and automation.
- 42-point and dynamic teach-in for flexible setup.
- 5Compact design with a rectangular housing for space efficiency.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Dimensions (W x H x D) | 12 mm x 31.5 mm x 21 mm | Sensing distance | ≤ 12.5 mm |
Sensing distance tolerance | ± 3 mm | Housing design | Small |
Light source | LED, RGB | Wave length | 470 nm, 525 nm, 625 nm |
Light emission | Long side of housing | Light spot size | 1.6 mm x 9.5 mm |
Light spot direction | Vertical | Receiving filters | None |
Adjustment | Cable, IO-Link, Teach-in button | Teach-in mode | 2-point teach-in static/dynamic + proximity to mark |
Supply voltage | 12 V DC ... 24 V DC | Ripple | ≤ 5 V |
Current consumption | < 50 mA | Switching frequency | 15 kHz |
Response time | 32 µs | Jitter | 15 µs |
Switching output | PNP | Switching output (voltage) | PNP: HIGH = U#!#≤ 2 V / LOW approx. 0 V |
Switching mode | Light/dark switching | Output current Imax. | 50 mA |
Retention time (ET) | 28 ms, non-volatile memory | Time delay | Switch-off delay, 520 ms (via IO-Link) |
Connection type | Male connector M8, 4-pin | Protection class | III |
Circuit protection | UVconnections, reverse polarity protected#!#Output Q short-circuit protected#!#Interference pulse suppression | Enclosure rating | IP67 |
Weight | 20 g | Housing material | ABS |
Optics material | PMMA | Indication | LED indicator green: power on#!#LED indicator, yellow: Status switching output Q |
IO-Link_Data transmission rate | 38,4 kbit/s (COM2) | IO-Link_Cycle time | 2.3 ms |
IO-Link_Process data length | 16 Bit | Process data structure A | Bit 0 ... 2 = Emission Color#!#Bit 3 … 12 = Measurment Value RGB#!#Bit 13 … 15 = empty |
Process data structure B | Bit 0 = switching signal QL1#!#Bit 1 … 10 = Measurment Value Emission Color#!#Bit 11 ... 15 = empty | Process data structure C | Bit 0 = switching signal QL1#!#Bit 1 = Quality of Run Alarm#!#Bit 2 = Teach successful#!#Bit 3 = Teach busy#!#Bit 4 ... 15 = empty |
Digital output_Number | 2 | Connection type | Male connector M8, 4-pin |
Pinouts_BN 1 | + (L+) | Pinouts_WH 2 | Q |
Pinouts_BU 3 | - (M) | Pinouts_BK 4 | Q/C |
Specifications may be subject to change without notice