Product Model
WLL80P-1IUIY1DZZZZZ1Z1
Selling Points
- 1Easily adjust settings via the OLED display for precise control.
- 2IP54 rating ensures durability in harsh environments.
- 3Operates on 12-24V DC, accommodating various power configurations.
- 4Fast response time and reliable detection capabilities.
- 5RoHS compliant and no SVHC (27-Jun-2024), meeting environmental standards.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Device type | Fiber-optic sensors | Device type detail | Stand-alone |
Functional principle detail | Depends on the fiber used | Sensing range max. | Depends on the fiber used |
Emitted beam_Light source | LED | Emitted beam_Type of light | Visible red light |
Key LED figures_Normative reference | EN 62471:2008-09 | IEC 62471:2006, modified | Key LED figures_LED risk group marking | Free group |
Key LED figures_Wave length | 660 nm | Key LED figures_Average service life | 100,000 h at Ta= +25 °C |
Adjustment_Display + operating buttons | For configuring the sensor parameters | Indication_LED green | Operating indicatorStatic on: power on |
Indication_LED yellow 1 | Status of switching output 1Permanently on: Switching output 1 activePermanently off: Switching output 1 not activeFlashing: Executing teach-in/teach-in error | Indication_LED yellow 2 | Analog output statusPermanently on: analog output activePermanently off: analog output not activeFlashing: Executing teach-in/teach-in error |
Indication_Display | Display of sensor functions | Indication | OLED display |
Items supplied | BEF-WLL180 mounting bracket | Analog | ✔ |
Supply voltage UB | 12 V DC ... 24 V DC | Ripple | ± 10 % |
Current consumption | ≤ 52 mA | Protection class | III |
Digital output_Number | 1 | Digital output_Type | Push-pull: PNP/NPN, PNP, NPN: open collector, Analog2) |
Digital output_Signal voltage PNP HIGH/LOW | Approx. UB-2.5 V / 0 V | Digital output_Signal voltage NPN HIGH/LOW | Approx. UB/ < 2.5 V |
Digital output_Output current Imax. | ≤ 50 mA | Digital output_Circuit protection outputs | Reverse polarity protected |
Digital output | Overcurrent protected | Digital output | Short-circuit protected |
Digital output_Response time | ≤ 16 µs, ≤ 70 µs, ≤ 250 µs, ≤ 500 µs, ≤ 1,000 µs, ≤ 2,000 µs, ≤ 8,000 µs | Digital output_Switching frequency | 31.2 kHz, 7.1 kHz, 2 kHz, 1 kHz, 500 Hz, 250 Hz, 62.5 Hz3) |
Digital output_Time functions | Switch-on delay, off delay, ON and OFF delay, Impulse (one shot), Switch-on delay and pulse, deactivated | Digital output_Delay time | Adjustment via operating buttons, 0 ms ... 30,000 ms |
Analog output_Number | 1 | Analog output_Type | 4 mA ... 20 mA (≤ 300 Ω) / 0 V ... 10 V (≥ 10 kΩ) / 1 V ... 5 V (≥ 10 kΩ) / switchable |
Analog output_Resolution | 12 bit | Digital input_Number | 1 |
Pin/Wire assignment_Function of pin 4/black (BK) | Analog output QA(current/voltage selectable), analog GND | Pin/Wire assignment_Function of pin 2/white (WH) | Teach-in input |
Pin/Wire assignment_Function of pin 2/white (WH) – detail | The pin 2 function of the sensor can be configured | Pin/Wire assignment_Pin 5 function/gray (GY) | Switching output, object present → Q1 output HIGH |
Pin/Wire assignment_Pin 5 function/gray (GY) – detail | The pin 5 function of the sensor can be configured | Housing | Rectangular |
Dimensions (W x H x D) | 10.5 mm x 33.2 mm x 79.9 mm | Connection | Cable, 5-wire, 2 m |
Connection detail_Deep-freeze property | Do not bend below 0 °C | Connection detail_Conductor size | 0.15 mm² |
Connection detail_Cable diameter | Ø 4 mm | Connection detail_Length of cable (L) | 2 m |
Material_Housing | Plastic, PC | Material_Cable | Plastic, PVC |
Weight | Approx. 76 g | Quality of run | Yes |
Specifications may be subject to change without notice