Product Model
WLL80P-22THY1XZS01Z1Z1
Selling Points
- 1High Precision Detection: Accurately detects proximity with visible red light LED.
- 2Durability & Reliability: Built with IP54-rated housing for robust performance in harsh environments.
- 3Flexible Configuration: Adjustable parameters via display and operating buttons.
- 4Versatile Outputs: Supports PNP and NPN outputs for seamless integration.
- 5Long Service Life: Designed for 100,000 hours of service life at +25°C ambient temperature.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Device type | Fiber-optic sensors | Device type detail | Stand-alone |
Functional principle detail | Depends on the fiber used | Sensing range max. | Depends on the fiber used |
Emitted beam_Light source | LED | Emitted beam_Type of light | Visible red light |
Key LED figures_Normative reference | EN 62471:2008-09 | IEC 62471:2006, modified | Key LED figures_LED risk group marking | Free group |
Key LED figures_Wave length | 660 nm | Key LED figures_Average service life | 100,000 h at Ta= +25 °C |
Adjustment_Display + operating buttons | For configuring the sensor parameters | Indication_LED green | Operating indicatorStatic on: power on |
Indication_LED yellow 1 | Status of switching output 1Permanently on: Switching output 1 activePermanently off: Switching output 1 not activeFlashing: Executing teach-in/teach-in error | Indication_LED yellow 2 | Analog output statusPermanently on: analog output activePermanently off: analog output not activeFlashing: Executing teach-in/teach-in error |
Indication_Display | Display of sensor functions | Indication | OLED display |
Special features | Function: Load parameter set (job) via cable / Pin2 | Items supplied | BEF-WLL180 mounting bracket |
Analog | ✔ | Supply voltage UB | 12 V DC ... 24 V DC |
Ripple | ± 10 % | Current consumption | ≤ 52 mA |
Protection class | III | Digital output_Number | 1 |
Digital output_Type | Push-pull: PNP/NPN, PNP, NPN: open collector, Analog2) | Digital output_Signal voltage PNP HIGH/LOW | Approx. UB-2.5 V / 0 V |
Digital output_Signal voltage NPN HIGH/LOW | Approx. UB/ < 2.5 V | Digital output_Output current Imax. | ≤ 50 mA |
Digital output_Circuit protection outputs | Reverse polarity protected | Digital output | Overcurrent protected |
Digital output | Short-circuit protected | Digital output_Response time | ≤ 16 µs, ≤ 70 µs, ≤ 250 µs, ≤ 500 µs, ≤ 1,000 µs, ≤ 2,000 µs, ≤ 8,000 µs |
Digital output_Switching frequency | 31.2 kHz, 7.1 kHz, 2 kHz, 1 kHz, 500 Hz, 250 Hz, 62.5 Hz3) | Digital output_Time functions | Switch-on delay, off delay, ON and OFF delay, Impulse (one shot), Switch-on delay and pulse, deactivated |
Digital output_Delay time | Adjustment via operating buttons, 0 ms ... 30,000 ms | Analog output_Number | 1 |
Analog output_Type | 4 mA ... 20 mA (≤ 300 Ω) / 0 V ... 10 V (≥ 10 kΩ) / 1 V ... 5 V (≥ 10 kΩ) / switchable | Analog output_Resolution | 12 bit |
Digital input_Number | 1 | Pin/Wire assignment_Function of pin 4/black (BK) | Analog output QA(current/voltage selectable) |
Pin/Wire assignment_Function of pin 2/white (WH) | Digital output Q1 | Pin/Wire assignment_Function of pin 2/white (WH) – detail | The pin 2 function of the sensor can be configured |
Housing | Rectangular | Dimensions (W x H x D) | 10.5 mm x 33.2 mm x 79.9 mm |
Connection | Male connector M8, 4-pin | Material_Housing | Plastic, PC |
Weight | Approx. 24 g | Quality of run | Yes |
Specifications may be subject to change without notice