Product Model
221-483
Selling Points
- 1Pull the lever up, insert a conductor, and push the lever back down for quick and easy termination.
- 2Suitable for devices with higher levels of power consumption, up to 440V.
- 3Meets ATEX (Ex 2 II G) and IECEx (Ex eb IIC Gb) Zone 1, 2 standards for hazardous locations.
- 4Terminates conductors from 0.14 to 4 mm², including solid, stranded, and fine-stranded wires.
- 5Transparent housing with light gray levers, operating from -55°C to +105°C.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Safety management note | NOTICE: Observe installation and safety instructions!Only to be used by electricians!Do not work under voltage/load!Use only for proper use!Observe national regulations/standards/guidelines!Observe technical specifications for the products!Observe the number of permissible potentials!Do not use damaged/dirty components!Observe conductor types, cross-sections and strip lengths!Insert conductor until it hits the product‘s backstop!Use original accessories!To be sold only with installation instructions! | Safety information | The permissible operating voltage of the connector with carrier (440?V or 275?V) depends on the mounting type. |
Safety information 2 | Only approved in conjunction with a mounting carrier (221-501). Other carriers are possible, see certificate/file. The connectors must be installed in an enclosure meeting the requirements of a recognized protection type per EN 60079-0, GB/T 3836.1 Section 1 or EN 60079-31, GB/T 3836.31. When installing the connectors in an enclosure of protection type “e” (increased safety per EN 60079-7, GB/T 3836.3), the clearances and creepage distances of Table 2 for this standard must be observed. See point 1 for the use of accessories. The connectors can be used both in Group II and Group I, as the standard requirements are identical in this case.The use of these components requires a new assessment by a notified certification agency. | Clamping units | 3 |
Total number of potentials | 1 | Width | 18.8?mm?/ 0.74?inches |
Height | 8.4 mm / 0.327 inches | Depth | 18.6 mm / 0.732 inches |
Note (material data) | Information on material specifications can be found here | Color | transparent |
Material group | IIIa | Insulation material (main housing) | Polycarbonate (PC) |
Flammability class per UL94 | V2 | Fire load | 0.064MJ |
Actuator color | light gray | Weight | 2.7g |
Ambient temperature (storage) | -40 … +60 °C | Continuous operating temperature | -55 … +105?°C |
eCl@ss 10.0 | 27-14-11-04 | eCl@ss 9.0 | 27-14-11-04 |
ETIM 9.0 | EC000446 | ETIM 8.0 | EC000446 |
ECCN | NO US CLASSIFICATION | PU (SPU) | 500?(50)?pcs |
Packaging type | box | Country of origin | DE |
GTIN | 4055143837347 | Customs tariff number | 85369010000 |
RoHS Compliance Status | Compliant,No Exemption | Approvals per | UL 60079 |
Rated voltage UL (Use Group C) | 440V | Rated current UL (Use Group C) | 20A |
Ratings per | ATEX: PTB 18 ATEX 1019 U / IECEx: PTB 18.0045U (Ex eb IIC Gb) | Rated voltage EN (Ex e II) | 440V |
Rated current (Ex e II) | 32A | Connection technology | CAGE CLAMP? |
Actuation type | Lever | Connectable conductor materials | Copper |
Nominal cross-section | 4 mm2 / 12 AWG | Solid conductor | 0.2 … 4?mm2?/ 24 … 12?AWG |
Stranded conductor | 0.2 … 4?mm2?/ 24 … 12?AWG | Fine-stranded conductor | 0.14 … 4?mm2?/ 24 … 12?AWG |
Strip length | 11?mm?/ 0.43?inches | Wiring direction | Side-entry wiring |
Specifications may be subject to change without notice