Siemens<span class="absolute bottom-0 left-0 w-0 h-0.5 bg-blue-600 transition-all duration-500 group-hover:w-full">

3UF7320-1AU00-0

Fault-tolerant digital module DM-F LOCAL for fail-safe disconnection.

3UF7920-0AA00-0

Door adapters, installed in the cabinet door or on the front panel, are used to bring out the system interfaces.

3UF7310-1AU00-0

Digital module, 4 input ports and 2 relay output ports, input voltage 110-240V AC/DC

3UF7013-1AU00-0

Basic equipment SIMOCODE pro V Ethernet/IP media redundancy DLR network server 100MBit/s

3UF7112-1AA01-0

Current/Voltage Acquisition Module V2, 10-115A, Structural Width 55mm, Through-Type Current Transformer

3UF7200-1AA01-0

Operation module, titanium gray, installed in the switch cabinet door or on the front panel.

3UF7902-0AA00-0

The initialization module is used for automatic parameter setting for SIMOCODE pro, suitable for fixed installations.

3UF7013-1AB00-0

Basic equipment SIMOCODE pro V Ethernet/IP media redundancy DLR network server 100MBit/s

3UF7010-1AB00-0

Basic Equipment SIMOCODE pro V, PROFIBUS-DP interface, 12 MBit/s, RS485, 4E/3A

3UF7400-1AA00-0

Simulation module, 2 input terminals (passive) and 1 output terminal for analog signal 0/4-20mA

3UF7012-1AB00-0

Basic unit SIMOCODE pro V MR, MODBUS RTU interface 57.6 Kbps, RS 485, 4I/3O freely parameterizable, Us: 24 V DC, input for thermistor connection Monostable relay outputs, expandable by extension modules

3ZS1632-1XX03-0YE0

Upgrade, for the PCS 7 block library SIMOCODE pro V8 to version SIMOCODE pro V9 AS blocks and panels for integrating SIMOCODE pro C/S

3UF7011-1AU00-2

Basic module SIMOCODE pro V PN GP, Ethernet/PROFINET IO, 1xRJ45, 110-240VAC/DC

3UF7932-0CA00-0

Y-type connection cable, used to connect to the initialization module.

3UF7020-1AU01-0

Basic equipment SIMOCODE pro S, PROFIBUS-DP interface

3UF7931-0AA00-0

Connect cable, length 0.1m, flat, for connecting base equipment.

3ZS1632-2XX03-0YB0

PCS 7 Block Library SIMOCODE - Each V9.0 AS Block for integrating SIMOCODE pro C/S/V into the process control system PCS 7 with Advanced Process Library requires SIMATIC PCS 7 V9.X Advanced Process Library runtime software to run AS modules in an automation system. Single license, no software and documentation included.

3UF7937-0BA00-0

Connection cable, 1.0m in length, round, for connecting base equipment.

3UF7900-0AA01-0

Energy storage module, parameter setting for SIMOCODE pro C without PC/PG, titanium gray